Cisco SFE2000P Reference Manual Download Page 189

Page: 189 / 286

181

Chapter 11: Configuring SNMP
Configuring SNMP Security

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

3. Define the relevant fields.

4. Click

Apply

. The SNMP views are defined, and the device is updated.

Defining SNMP Users

The

SNMP Users Page

provides information for creating SNMP groups, and assigning SNMP access

control privileges to SNMP groups. Groups allow network managers to assign access rights to specific
device features, or feature aspects.

1. Click

System

SNMP

Security

Users

. The

SNMP Users Page

opens:

SNMP Users Page

The

SNMP Users Page

contains the following fields.

•

User Name

— Displays the user-defined group to which access control rules are applied. The field

range is up to 30 characters.

•

Group Name

— Displays the user-defined group to which access control rules are applied.

•

Engine ID

— Indicates the local device engine ID.

•

Authentication

— Indicates the Authentication method used.

2. Click the

Add

button. The Add SNMP Group Membership Page opens:

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands