manualshive.com logo in svg

Cisco SFE2000P, Reference Manual

The Cisco SFE2000P is a high-performance network switch with Power over Ethernet capabilities. For detailed specifications and setup instructions, you can easily download the datasheet and user manual for free from our website. Empower your network with this reliable and efficient product.

Share
Download
background image

258

Chapter 16: Viewing Statistics

Managing RMON Statistics

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

16

Viewing the RMON History Table

1. Click 

Statistics > RMON > History

. The 

RMON History Control Page 

opens:

2. Click the 

History Table 

button. The 

RMON History Table Page

 opens:

RMON History Table Page

The 

RMON History Table Page

 contains the following fields:

•

History Entry No.

 — Displays the entry number for the History Control Table page.

•

Owner

 — Displays the RMON station or user that requested the RMON information. The field 

range is 0-20 characters.

•

Sample No. —

 Indicates the sample number from which the statistics were taken.

•

Drop Events — 

Indicates the number of dropped packets due to lack of network resources during 

the sampling interval. This may not represent the exact number dropped packets, but rather the 
number of times dropped packets were detected. 

•

Received Bytes (Octets)

 — Displays the number of octets received on the interface since the device 

was last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.

•

Received Packets

 — Displays the number of packets received on the interface since the device was 

last refreshed, including bad packets, Multicast and Broadcast packets.

•

Broadcast Packets

 — Displays the number of good Broadcast packets received on the interface 

since the device was last refreshed. This number does not include Multicast packets. 

•

Multicast Packets

 — Displays the number of good Multicast packets received on the interface since 

the device was last refreshed.

Summary of Contents for SFE2000P































































































































































































































































































Reviews:

No comments

Related manuals for SFE2000P

XGAMING X-Arcade Quick Start Manual preview
X-Arcade
Brand: XGAMING Pages: 9
Datavideo WR-500 Quick Start Manual preview
WR-500
Brand: Datavideo Pages: 8
J3C S20 Assembly Instructions preview
S20
Brand: J3C Pages: 2
Neets echo plus User Manual preview
echo plus
Brand: Neets Pages: 12
National Instruments NI 9871 Operating Instructions And Specifications preview
NI 9871
Brand: National Instruments Pages: 24
PACH & COMPANY AeGIS 4000 Quick Installation And Programming Manual preview
AeGIS 4000
Brand: PACH & COMPANY Pages: 4
UniPOS VIT 01 Instruction Manual preview
VIT 01
Brand: UniPOS Pages: 51
Unipulse F159 Operation Manual preview
F159
Brand: Unipulse Pages: 126
YachtSafe W010 Manual preview
W010
Brand: YachtSafe Pages: 3
WAM LBC Series Assembly And Main Instructions For Use And Maintenance preview
LBC Series
Brand: WAM Pages: 62
walimex WR-100 Instruction Manual preview
WR-100
Brand: walimex Pages: 7
Walchem WebMaster Manual preview
WebMaster
Brand: Walchem Pages: 2
Walchem WebMaster Quick Start Manual preview
WebMaster
Brand: Walchem Pages: 73
Walchem W900 Series Instruction Manual preview
W900 Series
Brand: Walchem Pages: 126
wallas 3008 Quick Start Manual preview
3008
Brand: wallas Pages: 2
Watts 709 Series Instruction, Installation, Maintenance And Repair Manual preview
709 Series
Brand: Watts Pages: 4
WaterCop SmartConnect Owner'S Manual preview
SmartConnect
Brand: WaterCop Pages: 4
Zamel Extra Free RZB-02 Quick Manual preview
Extra Free RZB-02
Brand: Zamel Pages: 2

Brands by name

Popular brands

Load more brands