Cisco SFE2000P Reference Manual Download Page 131

Page: 131 / 286

123

Chapter 7: Configuring IP Information
Domain Name System

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

Add DNS Host Page

The

Add DNS Host

page contains the following fields:

•

Host Name

— Displays a user-defined default domain name. When defined, the default domain

name is applied to all unqualified host names. The

Host Name

field can contain up to 158 characters.

•

IP Address

— Displays the DNS host IP address.

3. Define the relevant fields.

4. Click

Apply

. The DNS Host settings are defined, and the device is updated.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands