Cisco SFE2000P Reference Manual Download Page 103

Page: 103 / 286

Chapter 5: Configuring Device Interfaces
Defining LAG Management

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

Lag Management Page

The

Lag Management Page

contains the following fields.

•

LAG

— Displays the LAG number.

•

Name

— Displays the LAG name.

•

Link State

— Displays the link operational status.

•

Member

— Displays the ports configured to the LAG.

2. Define the relevant fields.

3. Click

Apply

. Lag Management is defined, and the device is updated.

Modifying Lag Membership

1. Click

Bridging

Port Management

Lag Management.

The

Lag Management Page

opens:

2. Click the

Edit

button. The

Edit LAG Membership Page

opens:

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Cisco SFE2000P, Reference Manual, Page: 103 / 286

Search results

Summary of Contents for SFE2000P

Reviews: