Cisco SFE2000P Reference Manual Download Page 113

Page: 113 / 286

105

Chapter 6: Configuring VLANs
Defining VLAN Properties

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

Add VLAN Page

The

Add VLAN Page

allows network administrators to define and configure new VLANs, contains the

following fields:

•

VLAN ID

— Displays the VLAN ID.

•

VLAN Name

— Displays the user-defined VLAN name.

Modifying VLANs

1. Click

Bridging

VLAN Management

Properties

. The

Properties Page

opens.

2. Click

Edit.

The

Authentication VLAN Settings Page

opens:

Authentication VLAN Settings Page

The

Authentication VLAN Settings Page

contains information for enabling VLAN guest authentication,

and includes the following fields:

•

VLAN ID

— Displays the VLAN ID.

•

VLAN Name

— Displays the VLAN name.

•

Disable Authentication

— Indicates whether unauthorized users can access a Guest VLAN. The

possible field values are:

–

Enable

— Enables unauthorized users to use the Guest VLAN.

–

Disable

— Disables unauthorized users from using the Guest VLAN.

•

Unit Number

— Displays the stacking member for which the VLAN parameters are displayed.

3. Define the relevant fields.

4. Click

Apply

. The VLAN Settings are defined, and the device is updated.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands