manualshive.com logo in svg

Cisco SFE2000P, Reference Manual

The Cisco SFE2000P is a high-performance network switch with Power over Ethernet capabilities. For detailed specifications and setup instructions, you can easily download the datasheet and user manual for free from our website. Empower your network with this reliable and efficient product.

Share
Download
background image

197

Chapter 11: Configuring SNMP
Defining Trap Management

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

11

–

Included

 — Sends OID traps or informs.

2. Click the 

Add

 button. The 

Add SNMP Notification Filter Page

 opens:

Add SNMP Notification Filter Page

The 

Add SNMP Notification Filter Page

 contains the following fields: 

•

Filter Name

 — Contains a list of user-defined notification filters. 

•

New Object Identifier Subtree 

— Displays the OID for which notifications are sent or blocked. If a 

filter is attached to an OID, traps or informs are generated and sent to the trap recipients. Object IDs 
are selected from either the Select from List or the Object ID List. there are two configuration 
options:

–

Select from List 

— Select the OID from the list provided.

–

Object ID 

— Enter an OID not offered in the 

Select from List

 option.

•

Filter Type

 — Indicates whether informs or traps are sent regarding the OID to the trap recipients.

–

Excluded

 

— Restricts sending OID traps or informs.

–

Included

 — Sends OID traps or informs.

3. Define the relevant fields.

4. Click 

Apply.

 The SNMP Notification Filter is added to the list, and the device is updated.

Summary of Contents for SFE2000P































































































































































































































































































Reviews:

No comments

Related manuals for SFE2000P

ABB Relion 670 series Applications Manual preview
Relion 670 series
Brand: ABB Pages: 760
ABB 650 series Engineering Manual preview
650 series
Brand: ABB Pages: 128
FAAC 740 D Manual preview
740 D
Brand: FAAC Pages: 14
Magnescale MG10-P1 Instruction Manual preview
MG10-P1
Brand: Magnescale Pages: 132
Fanimation BTCR9 Quick Start Manual preview
BTCR9
Brand: Fanimation Pages: 2
M2M C600 Technical Manual preview
C600
Brand: M2M Pages: 24
Samson 2406 Mounting And Operating Instructions preview
2406
Brand: Samson Pages: 32
Quantum FX Instruction Booklet preview
FX
Brand: Quantum Pages: 15
OMC W150 Installation And Maintenance Instruction preview
W150
Brand: OMC Pages: 18
Paradox REM3 Reference And Installation Manual preview
REM3
Brand: Paradox Pages: 2
Paradox IP150+ Programming Manual preview
IP150+
Brand: Paradox Pages: 2
Paradyne FrameSaver 9120 Installation Instructions Manual preview
FrameSaver 9120
Brand: Paradyne Pages: 20
Panduit VeriSafe VS2-NET Installation Manual preview
VeriSafe VS2-NET
Brand: Panduit Pages: 6
Saftronics CV10 Quick Start Manual preview
CV10
Brand: Saftronics Pages: 13
tbs electronics Omnicharge Solar OCS 100-20 Installation Manual preview
Omnicharge Solar OCS 100-20
Brand: tbs electronics Pages: 64
LST Extinguishing Control Panel BC06-2EXT Brochure & Specs preview
Extinguishing Control Panel BC06-2EXT
Brand: LST Pages: 4
Fluidmaster 200AM133 Installation Instructions preview
200AM133
Brand: Fluidmaster Pages: 2
KEY RK-2001W Operation Manual preview
RK-2001W
Brand: KEY Pages: 16

Brands by name

Popular brands

Load more brands