Cisco SFE2000P Reference Manual Download Page 164

Page: 164 / 286

156

Chapter 9: Configuring Multicast Forwarding

Defining Multicast Forwarding

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

–

Excluded

— The port is not part of a Multicast group.

–

Dynamic

— Attaches the port to the Multicast group as dynamic member.

Modifying

Multicast Forwarding

1. Click

Bridging > Multicast > Forward

. The

Multicast Forward Page

opens:

2. Click the

Edit

button. The

Edit Multicast Forward All Page

opens:

Edit Multicast Forward All Page

The

Edit Multicast Forward All Page

contains the following fields:

•

VLAN ID

— Displays the VLAN ID.

•

Interface

— Displays the port or LAG attached to the Multicast Group.

•

Interface Status

— Displays the interface status.

3. Define the relevant fields.

4. Click

Apply

. The multicast forward all settings are defined, and the device is updated.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands