Cisco SFE2000P Reference Manual Download Page 226

Page: 226 / 286

218

Chapter 12: Configuring Quality of Service

Defining Advanced Mode

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

Add QoS Policy Binding Page

The

Add QoS Policy Binding Page

contains the following fields.

•

Interface

— Displays the interface to which the entry refers.

•

Policy Name

— Displays a Policy name configured to the interface.

3. Define the relevant fields.

4. Click

Apply

. The QoS Policy Binding is defined, and the device is updated.

Modifying QoS Policy Binding Settings

1. Click

Quality of Service

Advanced

Policy Binding

. The

Policy Binding Page

opens:

2. Click the

Edit

button. The

Edit QoS Policy Binding Page

opens:

Edit QoS Policy Binding Page

The

Edit QoS Policy Binding Page

contains the following fields.

•

Interface

— Displays the interface to which the entry refers.

•

Policy Name

— Displays a Policy name configured to the interface.

3. Define the relevant fields.

4. Click

Apply

. The QoS policy binding is defined, and the device is updated.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands