manualshive.com logo in svg

Cisco SFE2000P, Reference Manual

The Cisco SFE2000P is a high-performance network switch with Power over Ethernet capabilities. For detailed specifications and setup instructions, you can easily download the datasheet and user manual for free from our website. Empower your network with this reliable and efficient product.

Share
Download
background image

230

Chapter 14: Managing System Logs

Viewing the Device Memory Logs

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

14

2. Click the 

Clear Logs button. 

The message logs are cleared.

Viewing the Flash Logs

The 

Flash Page 

contains information about log entries saved to the Log File in FLASH, including the 

time the log was generated, the log severity, and a description of the log message. The Message Log is 
available after reboot. To view the Flash Logs:

1. Click 

Admin

 > 

Logs 

> 

Flash

. The 

Flash Page

 opens:

Flash Page

The 

Flash Page

 contains the following fields:

•

Log Index

 — Displays the log number.

•

Log Time

 — Displays the time at which the log was generated.

•

Severity

 — Displays the log severity.

•

Description

 — Displays the log message text.

Clearing Message Logs

Message Logs can be cleared from the 

FLASH Log Page

. To clear the Flash Page:

1. Click 

Admin > Logs > FLASH

. The 

Flash Page 

opens.

2. Click 

Clear Logs

. The message logs are cleared.

Summary of Contents for SFE2000P































































































































































































































































































Reviews:

No comments

Related manuals for SFE2000P

Nelson 800 Series Application Manual preview
800 Series
Brand: Nelson Pages: 19
C-TEC 800 Series Installation Instructions preview
800 Series
Brand: C-TEC Pages: 2
Ubisys J1 Manual preview
J1
Brand: Ubisys Pages: 2
eclisse E-MOTION Installation, Operation And Maintenance Manual preview
E-MOTION
Brand: eclisse Pages: 40
Hama Thunder V18 Instruction Manual preview
Thunder V18
Brand: Hama Pages: 12
Hama Thunder V18 Operating Instruction preview
Thunder V18
Brand: Hama Pages: 12
Hama Mini V3 Rumble Operating Instruction preview
Mini V3 Rumble
Brand: Hama Pages: 14
Hama Dual Vibration Operating Instruction preview
Dual Vibration
Brand: Hama Pages: 8
Walimex Pro Excellence Instruction Manual preview
Excellence
Brand: Walimex Pro Pages: 68
YOKOGAWA UTAdvanced UT35A Technical Information preview
UTAdvanced UT35A
Brand: YOKOGAWA Pages: 18
One for All Kameleon User Manual preview
Kameleon
Brand: One for All Pages: 15
Harman FG2106-04 Quick Start Manual preview
FG2106-04
Brand: Harman Pages: 2
Linear Technology LT3507 Demo Manual preview
LT3507
Brand: Linear Technology Pages: 6
Nortek WRC4 Owner'S Manual preview
WRC4
Brand: Nortek Pages: 24
Raypak RAYTHERM 624 Specifications preview
RAYTHERM 624
Brand: Raypak Pages: 2
4D systems gen4-uLCD-32D Quick Start Manual preview
gen4-uLCD-32D
Brand: 4D systems Pages: 6
Phoenic Mecano Okin Q28-BNC Quick Start Manual preview
Okin Q28-BNC
Brand: Phoenic Mecano Pages: 5
UniPOS FD7203 Instruction Manual preview
FD7203
Brand: UniPOS Pages: 6

Brands by name

Popular brands

Load more brands