Cisco SFE2000P Reference Manual Download Page 268

Page: 268 / 286

260

Chapter 16: Viewing Statistics

Managing RMON Statistics

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

RMON Events Page

The

RMON Events Page

contains fields for defining RMON events. The

RMON RMON Events Page

page contains the following fields:

•

Event Entry

— Displays the event.

•

Community

— Displays the community to which the event belongs.

•

Description

— Displays the user-defined event description.

•

Type

— Describes the event type. Possible values are:

–

None

— Indicates that no event occurred.

–

Log

—Indicates that the event is a log entry.

–

Trap

— Indicates that the event is a trap.

–

Log and Trap

— Indicates that the event is both a log entry and a trap.

•

Time

— Displays the time that the event occurred.

•

Owner

— Displays the device or user that defined the event.

The

Add to List

button adds the configured RMON event to the Event Table at the bottom of the page.

2. Click the

Add

button. The

Add RMON Events Page

opens:

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands