manualshive.com logo in svg

Cisco SFE2000P, Reference Manual

The Cisco SFE2000P is a high-performance network switch with Power over Ethernet capabilities. For detailed specifications and setup instructions, you can easily download the datasheet and user manual for free from our website. Empower your network with this reliable and efficient product.

Share
Download
background image

232

Chapter 14: Managing System Logs

Viewing the Device Memory Logs

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

14

Add Syslog Server Page

The 

Add Syslog Server Page

 contains information for viewing and configuring the Remote Log Servers. 

New log servers can be defined, and the log severity sent to each server. 

The 

Add Syslog Server Page 

contains the following fields: 

•

Log Server IP Address 

— Specifies the server to which logs can be sent.

•

UDP Port 

— Defines the UDP port to which the server logs are sent. The possible range is 1 to 

65535. The default value is 514. 

•

Facility 

— Defines a user-defined application from which system logs are sent to the remote server. 

Only one facility can be assigned to a single server. If a second facility level is assigned, the first 
facility is overridden. All applications defined for a device utilize the same facility on a server. The 
field default is Local 7. The possible field values are 

Local 0 - Local 7.

•

Description

 — Provides a user-defined server description.

•

Minimum Severity

 — Indicates the minimum severity from which logs are sent to the server. For 

example, if Notice is selected, all logs from a Notice severity and higher are sent to the remote 
server. 

3. Define the relevant fields.

4. Click 

Apply.

 The 

Add Syslog Server Page 

closes, the syslog server is added, and the device is 

updated.

Modify Syslog Server Settings

1. Click 

Admin

 > 

Logs 

> 

Remote Log Servers

. The 

Remote Log Servers Page

 opens:

2. Click the 

Edit 

button. The 

Syslog Server Settings Page

 opens:

Summary of Contents for SFE2000P































































































































































































































































































Reviews:

No comments

Related manuals for SFE2000P

Dakota Digital BIM-17-2 Manual preview
BIM-17-2
Brand: Dakota Digital Pages: 6
Dakota Digital CMD-2000 Series Manual preview
CMD-2000 Series
Brand: Dakota Digital Pages: 10
Z-Wave RC-100 Quick Setup Manual preview
RC-100
Brand: Z-Wave Pages: 6
Yamaha CEmarking RCX221 User Manual preview
CEmarking RCX221
Brand: Yamaha Pages: 468
Parker P33 Integration Manual preview
P33
Brand: Parker Pages: 54
RAM RP2000 User Manual preview
RP2000
Brand: RAM Pages: 71
Daihan Scientific WHM-C10D Operation Manual preview
WHM-C10D
Brand: Daihan Scientific Pages: 11
Kärcher SensoTimer ST6 Duo eco!ogic Manual preview
SensoTimer ST6 Duo eco!ogic
Brand: Kärcher Pages: 96
SMC Networks VP31 5 Series Operation Manual preview
VP31 5 Series
Brand: SMC Networks Pages: 15
Swagelok TBVS4 User Manual preview
TBVS4
Brand: Swagelok Pages: 16
ZiLOG Z8 Encore! XP Dual F1680 Series User Manual preview
Z8 Encore! XP Dual F1680 Series
Brand: ZiLOG Pages: 18
Danfoss AME 56K Instructions Manual preview
AME 56K
Brand: Danfoss Pages: 10
SimCom SIM300DZ Manuallines preview
SIM300DZ
Brand: SimCom Pages: 13
Emcotec RC Electronic DPSI LCD Operating Instructions Manual preview
RC Electronic DPSI LCD
Brand: Emcotec Pages: 32
Allen-Bradley 1771-OD Installation Data preview
1771-OD
Brand: Allen-Bradley Pages: 8
Hansen H5600A Specifications, Applications, Service Instructions & Parts preview
H5600A
Brand: Hansen Pages: 4
Burkert 20010867 Operating Instructions Manual preview
20010867
Brand: Burkert Pages: 42
Clemco TLR-50 Operating Manual preview
TLR-50
Brand: Clemco Pages: 14

Brands by name

Popular brands

Load more brands