23-11
User Guide for Cisco Security MARS Local Controller
78-17020-01
Chapter 23 Management Tab Overview
User Management
Step 5
If you are creating a notification by pager, go to the next section,
“Add a Service Provider (Cell
phone/Pager)”
, otherwise click
Submit
to complete the procedure for adding a user.
Add a Service Provider (Cell phone/Pager)
When configuring a notification by pager, add a service provider (cell phone or pager company) by
completing the following procedure:
Step 1
From the
Service Provider
field, select
New Provider
. Additional fields appear, as shown in
Figure 23-5
.
The pull-down menu is populated as you add new service providers.
Figure 23-5
Select a New Provider and Provide Contact Details
Step 2
In the
Provider Name
field, enter the name of the service provider.
Step 3
In the
Provider Phone No
field, enter the service provider’s telephone number.
This is the number the service provider uses for accepting alpha-numeric messages using the IXO/TAP
protocol. The format is like a regular phone number, such as: 18001234567. The format of
1-800-1234567 is also acceptable. If dialing “9” is required to access a number outside your private
branch exchange, type a “9,” before the full telephone number (for example, 9,1-800-1234567).
Step 4
In the
Provider Baudrate
field, enter the baud rate specified by the provider.
This is the baud rate the service provider requires for the specified phone number. Common values are
1200, 2400, 4800, and 9600.
Consult your service provider’s website for more information on their baud rates.
Step 5
Click
Submit
to close the User Configuration page and return to the
User Management
tab.
Search for a User
Step 1
Enter the text that you want to search for in the
Search
field.
Step 2
Click
Search
.
