manualshive.com logo in svg

Cisco CS-MARS-20-K9 - Security MARS 20, User Manual

The Cisco CS-MARS-20-K9 - Security MARS 20 is a highly efficient security management appliance. Unlock the full potential of this product by easily accessing its comprehensive User Manual. Enjoy hassle-free downloading and get your free copy from our website, empowering you to explore the device's features to the fullest.

Share
Download
background image

 

21-11

User Guide for Cisco Security MARS Local Controller

78-17020-01

Chapter 21      Rules

Constructing a Rule

Green Severity Event 
Types—Displays all green event 
types 

Device

 The value of this condition can be one of the following: 

 

Variables

—Signify any single 

device defined under Admin > 
System Management > Security and 
Monitor Devices, only useful for 
lines in tandem with the same 
variable. 

•

ANY

—(Default) Specifies that 

this rule is applied to events 
generated by any of the reporting 
devices defined in MARS.

•

SAME 

•

DISTINCT 

•

Unknown Reporting 
Device

—Specifies that this rule is 

applied to events generated by 
any reporting device that is not 
defined in MARS. 

•

$DEVICE01 to $DEVICE10 

•

Reporting Devices

—Identifies 

one or more hosts or reporting 
devices for which events are 
inspected. Valid values are one 
or more devices as defined 
under Admin > System Setup > 
Security and Monitor Devices. 

Defined Device Types—

Reported User 

Identifies the active user on the host 
when this event was recorded. Not 
all events include this data. The 
value of this condition can be one of 
the following: 

•

ANY

—No constraint is placed on 

the reported user.

•

NONE

—(Default) Specifies that 

this condition should not be used 
to match this rule.

•

Variables

—Signify any single 

user, only useful for lines in 
tandem with the same variable.

•

Invalid User Name

—Specifies 

that this condition is met when the 
user name reported is invalid. 

Table 21-1

Rule Fields and Arguments 

Rule Field 

Field Description and Arguments

Argument Descriptions 

Summary of Contents for CS-MARS-20-K9 - Security MARS 20













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CS-MARS-20-K9 - Security MARS 20

GE TLE Scalable 150 Quick Start Manual preview
TLE Scalable 150
Brand: GE Pages: 6
GE SIMON XT Instruction Manual preview
SIMON XT
Brand: GE Pages: 3
GE NetworX Series Installation And Start-Up Manual preview
NetworX Series
Brand: GE Pages: 80
GE PACSystems* RX3i Application Manual preview
PACSystems* RX3i
Brand: GE Pages: 39
GE PACSystems* RX3i Secure Deployment Manual preview
PACSystems* RX3i
Brand: GE Pages: 35
GE PACSystems* RX3i Important Product Information preview
PACSystems* RX3i
Brand: GE Pages: 3
GE PACSystems* RX3i User Manual preview
PACSystems* RX3i
Brand: GE Pages: 169
GE PACSystems RX7i Reference Manual preview
PACSystems RX7i
Brand: GE Pages: 317
E+E Elektronik EE23 series Operation Manual preview
EE23 series
Brand: E+E Elektronik Pages: 20
Samson 3354 Mounting And Operating Instructions preview
3354
Brand: Samson Pages: 40
Packard Bell Slim Remote Control Instruction preview
Slim Remote Control
Brand: Packard Bell Pages: 2
Unipower PCM500 Series Operating Manual preview
PCM500 Series
Brand: Unipower Pages: 24
York CIW01 Installation & Maintenance Manual preview
CIW01
Brand: York Pages: 24
Zener SMARTSTART 6000 Networking Manual preview
SMARTSTART 6000
Brand: Zener Pages: 36
Zapi SMART CONSOLE Instructions preview
SMART CONSOLE
Brand: Zapi Pages: 5
MULTISPAN UTC-4203 Operating Manual preview
UTC-4203
Brand: MULTISPAN Pages: 2
Monster Central REVOLUTION 200 Instruction Manual preview
REVOLUTION 200
Brand: Monster Central Pages: 13
Rain Bird ESP-RZXe Installation And Operation Manual preview
ESP-RZXe
Brand: Rain Bird Pages: 18

Brands by name

Popular brands

Load more brands