manualshive.com logo in svg

Cisco CS-MARS-20-K9 - Security MARS 20, User Manual

The Cisco CS-MARS-20-K9 - Security MARS 20 is a highly efficient security management appliance. Unlock the full potential of this product by easily accessing its comprehensive User Manual. Enjoy hassle-free downloading and get your free copy from our website, empowering you to explore the device's features to the fullest.

Share
Download
background image

 

14-10

User Guide for Cisco Security MARS Local Controller

78-17020-01

Chapter 14      Configuring AAA Devices

Install and Configure the PN Log Agent

Upgrade PN Log Agent to a Newer Version

You can determine which version of the PN Log Agent is running on your server by selecting Help > 
About in the PN Log Agent Configuration dialog box. This program is updated independently of the 
MARS Appliance software updates. Therefore, the version number does not correspond to any release 
of the MARS Appliance software.

Note

Beginning with the 4.1.3 release of the pnLog agent, the agent requires a minimum of Cisco Security 
Monitoring, Analysis, and Response System, release 4.1.3 running on the appliances to which it is 
reporting in order to operate correctly.

To upgrade to the new PN Log Agent from an existing installation, you must perform the following 
steps:

Step 1

On the Cisco Secure ACS or syslog server where PN Log Agent is running, uninstall the old agent. 

a.

To uninstall the old agent, click 

Start > Control Panel > Add/Remove Programs

. 

b.

Select 

PnLogAgent

 in the list of currently installed programs, and click 

Remove

.

c.

Select 

Yes

 to confirm the removal.

Step 2

Reboot the server.

Step 3

Install the new agent. You can download this tool from the following URL:

http://www.cisco.com/cgi-bin/tablebuild.pl/cs-mars-misc

Step 4

Re-configure the new agent, specifying the list of files and IP address of the MARS Appliance, etc. 

For information on configuring the pnLog Agent, see 

Install and Configure the PN Log Agent, page 

14-7

.

Application Log Messages for the PN Log Agent

The PN Log Agent service writes events to the Application Log of Event Viewer on the Cisco Secure 
ACS server. The agent, identified in the log messages as PNLogAgentService, writes status messages, 
such as successful service start and stop. It also writes error messages for incomplete configuration and 
error conditions, such as when the service is out of memory.

Table 14-1

 categories the types of messages that can occur and explains their affects on the PNLog Agent 

service.

Summary of Contents for CS-MARS-20-K9 - Security MARS 20













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CS-MARS-20-K9 - Security MARS 20

ZETRON MAX Connection Manual preview
MAX
Brand: ZETRON Pages: 3
ADEMCO MAX Programming Instructions preview
MAX
Brand: ADEMCO Pages: 2
Saitek X36 Manual preview
X36
Brand: Saitek Pages: 4
Eaton A201 Instruction Leaflet preview
A201
Brand: Eaton Pages: 6
V2 ELETTRONICA PD1 Manual preview
PD1
Brand: V2 ELETTRONICA Pages: 72
JENCO 6311 Operation Manual preview
6311
Brand: JENCO Pages: 36
jcm-tech WAVE500 User Manual preview
WAVE500
Brand: jcm-tech Pages: 8
OJ Electronics EFR Series Instructions Manual preview
EFR Series
Brand: OJ Electronics Pages: 8
OJ Electronics ETO2 Manual preview
ETO2
Brand: OJ Electronics Pages: 112
OJ EFS Series Instructions Manual preview
EFS Series
Brand: OJ Pages: 17
Samson 3756 Mounting And Operating Instructions preview
3756
Brand: Samson Pages: 56
EasyIO FG-20 Installation Manual preview
FG-20
Brand: EasyIO Pages: 17
V2 STARK6 Quick Start Manual preview
STARK6
Brand: V2 Pages: 12
H3C WBC580 G2 Installation, Quick Start preview
WBC580 G2
Brand: H3C Pages: 5
u-blox NORA-W10 Series System Integration Manual preview
NORA-W10 Series
Brand: u-blox Pages: 56
z21 XL BOOSTER Quick Start Manual preview
XL BOOSTER
Brand: z21 Pages: 2
TEL AFA4000/1/AS Installation And Calibration Manual preview
AFA4000/1/AS
Brand: TEL Pages: 26
Vimar EAM6 Installation And Operation Manual preview
EAM6
Brand: Vimar Pages: 32

Brands by name

Popular brands

Load more brands