23-6
User Guide for Cisco Security MARS Local Controller
78-17020-01
Chapter 23 Management Tab Overview
IP Management
Figure 23-3
General Information for a Host
Step 4
In the Name field, enter the host’s name.
Step 5
In the Access IP field, identify the address used to pull log events from this host or used to connect to
when performing dynamic vulnerability assessments while investigating detected attacks.
Step 6
If the host is running a variety of Windows, Solaris, or Linux, select the corresponding value in the
Operating System field. Otherwise, verify that Generic is selected.
Step 7
If your are running NetBIOS on your network, enter the name associated with this host.
NetBIOS provides name registration and resolution services. MARS uses this setting to provide attack
path analysis and address resolution.
Step 8
Add as many IP address and masks to the interface by clicking
Add IP/Mask
.
Step 9
Under Enter Interface Information, enter the values for the interface name, IP address, and network
mask.
Step 10
If you have a dual-homed host, you can add additional interfaces by clicking
Add Interface
.
Step 11
To specify vulnerability assessment information, continue with
Define Vulnerability Assessment
Information, page 10-12
.
Edit Host Information
Step 1
Select
Management >
IP Management
.
Step 2
Check the box next to the host that you want to edit.
Step 3
If you are editing interface or IP mask information, make your changes here and click
Submit
.
