manualshive.com logo in svg

Cisco CS-MARS-20-K9 - Security MARS 20, User Manual

The Cisco CS-MARS-20-K9 - Security MARS 20 is a highly efficient security management appliance. Unlock the full potential of this product by easily accessing its comprehensive User Manual. Enjoy hassle-free downloading and get your free copy from our website, empowering you to explore the device's features to the fullest.

Share
Download
background image

 

4-46

User Guide for Cisco Security MARS Local Controller

78-17020-01

Chapter 4      Configuring Firewall Devices

Check Point Devices

•

Select the host on which the child enforcement module is running, click 

Change Existing

, and 

continue with 

Step 7

Result

: A page with a read-only device name appears, prompting you to specify the SNMP RO 

Community string.

•

Click 

Add New

 to define a new host, and continue with 

Step 7

Result

: A page appears, prompting you to specify device name and SNMP RO Community string.

Step 7

Enter the name of the child enforcement module or log server in the Device Name

 

field.

MARS maps this name to the IP address specified in the interfaces. This name is used in topology maps, 
queries, and appears in the Children column of the base Check Point module in the Security and 
Monitoring Device list.

Step 8

(Optional) To enable MARS to retrieve MIB objects for this reporting device, enter the child 
enforcement module’s read-only community string in the SNMP RO Community field.

Summary of Contents for CS-MARS-20-K9 - Security MARS 20













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CS-MARS-20-K9 - Security MARS 20

Wavetec Spectra Installation Manual preview
Spectra
Brand: Wavetec Pages: 17
Calsense ET1 Manual To Programming preview
ET1
Brand: Calsense Pages: 9
MaestroHome Smart Controller Quick Setup Manual preview
Smart Controller
Brand: MaestroHome Pages: 10
Ohsung Electronics B905-FTN-TA User Manual preview
B905-FTN-TA
Brand: Ohsung Electronics Pages: 18
Watts 2300 Series Installation Instructions Manual preview
2300 Series
Brand: Watts Pages: 12
Lancom GS-1108 Manual preview
GS-1108
Brand: Lancom Pages: 8
Parker TFP Series Operation Manual preview
TFP Series
Brand: Parker Pages: 16
ZKTeco SRB Connection Manual preview
SRB
Brand: ZKTeco Pages: 2
Audioaccess PX-700 Manual preview
PX-700
Brand: Audioaccess Pages: 2
Desoutter 6159326760 Original Instructions Manual preview
6159326760
Brand: Desoutter Pages: 74
jablotron CL-301SL Quick Start Manual preview
CL-301SL
Brand: jablotron Pages: 2
Dickey-John Control Point Operator'S Manual preview
Control Point
Brand: Dickey-John Pages: 109
Vimar by-me Eikon 20526 Quick Start Manual preview
by-me Eikon 20526
Brand: Vimar Pages: 6
Harman FG2106-04 Quick Start Manual preview
FG2106-04
Brand: Harman Pages: 2
Linear Technology LT3507 Demo Manual preview
LT3507
Brand: Linear Technology Pages: 6
Nortek WRC4 Owner'S Manual preview
WRC4
Brand: Nortek Pages: 24
NXP Semiconductors MPC560xB User Manual preview
MPC560xB
Brand: NXP Semiconductors Pages: 39
FASAR ELETTRONICA FE1031 Manual preview
FE1031
Brand: FASAR ELETTRONICA Pages: 2

Brands by name

Popular brands

Load more brands