manualshive.com logo in svg

Cisco CS-MARS-20-K9 - Security MARS 20, User Manual

The Cisco CS-MARS-20-K9 - Security MARS 20 is a highly efficient security management appliance. Unlock the full potential of this product by easily accessing its comprehensive User Manual. Enjoy hassle-free downloading and get your free copy from our website, empowering you to explore the device's features to the fullest.

Share
Download
background image

 

4-40

User Guide for Cisco Security MARS Local Controller

78-17020-01

Chapter 4      Configuring Firewall Devices

Check Point Devices

•

Manually Add a Child Enforcement Module or Log Server to a Check Point Primary Management 
Station, page 4-44

•

Edit Discovered Log Servers on a Check Point Primary Management Station, page 4-48

•

Edit Discovered Firewall on a Check Point Primary Management Station, page 4-50

•

Verify Connectivity Between MARS and Check Point Devices, page 4-55

If discovery of Check Point configuration settings is not enabled for MARS, you must perform the 
following manual configuration procedures:

•

Manually Add a Child Enforcement Module or Log Server to a Check Point Primary Management 
Station, page 4-44

•

Specify Log Info Settings for a Child Enforcement Module or Log Server, page 4-52

Before You Begin

To perform this procedure, you need the following information:

•

A MARS account with Administrative privileges.

•

A Check Point CMA or SmartCenter username and password that has READ access (minimum 
requirement).

•

The client and server SIC DNs.

•

If you are defining a CMA for Provider-1 or SiteManager-1, you must have the virtual IP address 
(VIP) for each CMA and CLM managed by the MDS. 

Add a Check Point Primary Management Station to MARS

The primary management station represents one of the following:

•

The SmartCenter server in a SmartCenter or SmartCenter Pro installation. 

•

A CMA of a Provider-1 or SiteManager-1 installation.

Note

Check Point 4.1, NG FP1, and NG FP2 devices are not officially supported. They cannot be configured 
to retrieve configuration information using CPMI. However, they can be configured to retrieve logs 
using LEA. To configure one of these devices to work with the MARS, leave the Access IP

 

field blank 

on the host that represents the base platform.

You must define each individual CMA of a Provider-1 or SiteManager installation, regardless of the 
release and version.

Step 1

Select 

Admin > System Setup > Security and Monitor Devices >

 

Add

.

Step 2

Do one of the following:

•

Select 

Add SW Security apps on a new host 

from the Device Type

 

list, and continue with 

Step 3

•

Select 

Add SW security apps on existing host 

from the Device Type

 

list. Select the device to which 

you want to add the software application and click Add. Continue with 

Step 7

.

Step 3

Specify values for the following fields:

Summary of Contents for CS-MARS-20-K9 - Security MARS 20













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CS-MARS-20-K9 - Security MARS 20

Cansec H1000 Installation Manual And Instructions For Use preview
H1000
Brand: Cansec Pages: 45
Cansec CP40 Installation Manual preview
CP40
Brand: Cansec Pages: 43
Cansec MAP2 Installation Manual preview
MAP2
Brand: Cansec Pages: 32
Danfoss VLT MCD 200 Installation Manual preview
VLT MCD 200
Brand: Danfoss Pages: 32
Danfoss PVG 16 PVH/Covers Technical Information preview
PVG 16 PVH/Covers
Brand: Danfoss Pages: 112
Danfoss PVG 100 Service And Parts Manual preview
PVG 100
Brand: Danfoss Pages: 44
Danfoss PVG 16 PVH/Covers Service And Parts Manual preview
PVG 16 PVH/Covers
Brand: Danfoss Pages: 144
Danfoss VLT LCP 11 Installation Instructions preview
VLT LCP 11
Brand: Danfoss Pages: 2
Danfoss VLT FC Series Operating Instructions Manual preview
VLT FC Series
Brand: Danfoss Pages: 64
Danfoss EKC 102A Instructions Manual preview
EKC 102A
Brand: Danfoss Pages: 8
Danfoss VLT AutomationDrive FC 360 Programming Manual preview
VLT AutomationDrive FC 360
Brand: Danfoss Pages: 60
Danfoss DHP-A Installation Instruction preview
DHP-A
Brand: Danfoss Pages: 6
Danfoss AMV 110 NL AQT Datasheet preview
AMV 110 NL AQT
Brand: Danfoss Pages: 4
Danfoss VLT FC Series Installation Manual preview
VLT FC Series
Brand: Danfoss Pages: 8
Danfoss AK-CC 550A Troubleshooting Manuallines preview
AK-CC 550A
Brand: Danfoss Pages: 2
Danfoss ECL Comfort 110 Quick Manual preview
ECL Comfort 110
Brand: Danfoss Pages: 2
Danfoss 103E5 Installation & User'S Instructions preview
103E5
Brand: Danfoss Pages: 24
OMC W150 Installation And Maintenance Instruction preview
W150
Brand: OMC Pages: 18

Brands by name

Popular brands

Load more brands