manualshive.com logo in svg

Cisco CS-MARS-20-K9 - Security MARS 20, User Manual

The Cisco CS-MARS-20-K9 - Security MARS 20 is a highly efficient security management appliance. Unlock the full potential of this product by easily accessing its comprehensive User Manual. Enjoy hassle-free downloading and get your free copy from our website, empowering you to explore the device's features to the fullest.

Share
Download
background image

 

2-54

User Guide for Cisco Security MARS Local Controller

78-17020-01

Chapter 2      Reporting and Mitigation Devices Overview

Integrating MARS with 3

rd

-Party Applications

•

System Rule: Security Posture: Vulnerable Host Found

For information on configuring reporting devices and mitigation devices with NAC support, see 

Enable 

NAC-specific Messages, page 3-4

.

Integrating MARS with 3

rd

-Party Applications

MARS provides multiple integration methods with 3

rd

-party applications. The following topics describe 

how to integrate using these methods:

•

Forwarding Alert Data to 3

rd

-Party Syslog and SNMP Servers, page 2-54

•

MARS MIB Format, page 2-54

•

Relaying Syslog Messages from 3rd-Party Syslog Servers, page 2-56

Forwarding Alert Data to 3

rd

-Party Syslog and SNMP Servers

You can forward alert data from MARS to third-party syslog and SNMP servers. The data is forwarded 
on a per rule basis. In other words, you must configure those rules for which you want to forward alert 
data to include either SNMP, syslog, or both as a notification methods. When a rule fires, the 
notifications will be sent in the selected formats to the specified recipients, which should be the desired 
servers in the case of SNMP and syslog. 

For more information on configuring notification methods for a rule, see 

Setting Alerts, page 21-23

. To 

learn more about the SNMP MIB format sent by MARS, see 

MARS MIB Format, page 2-54

.

MARS MIB Format

The MARS management information base (MIB) is defined for all MARS releases. The SNMP 
notification contains the same content as the syslog generated by MARS. 

The MARS MIB definition is as follows: 

enterprises.16686.1.0 string “MARS-1-101” 
enterprises.16686.2.0 string “<alert_content>” 
enterprises.16686.3.0 string "<optional_port_list_for_sudden_traffic_increase_incident>"

The MARS private enterprise number is 16686 and <alert_content> is defined as follows: 

<<priorityInfo>> <current_time> %MARS-1-101: Rule <ruleid> (<rulename>) fired and caused 

<color> Incident <incidentId>, starting from <starttime> to <endtime>. 

In the following two examples of the SNMP notification output, 10.1.1.1 is the IP address of the MARS 
Appliance:

SNMPv2-SMI::enterprises.16686 10.1.1.1 SNMPv2-SMI::enterprises.16686.1.0 "MARS-1-101" 

SNMPv2-SMI::enterprises.16686.2.0 "<34>Mon Apr 28 20:11:43 2003 %MARS-1-101: Rule 45513 

(Nimda Attack) fired and caused red Incident 12265001, starting from Mon Apr 28 19:58:47 

2003 to Mon Apr 28 20:11:21 2003" 

SNMPv2-SMI::enterprises.16686 10.1.1.1 SNMPv2-SMI::enterprises.16686.1.0 "MARS-1-101" 

SNMPv2-SMI::enterprises.16686.2.0 "<34>Wed Mar 14 12:28:24 2007 %MARS-1-101: Rule 489722 

(System Rule: Sudden Traffic Increase To Port) fired and caused red Incident 204368256, 

starting from Wed Mar 14 12:28:14 2007 to Wed Mar 14 12:28:14 2007" 

SNMPv2-SMI::enterprises.16686.3.0 "sudden traffic increase to ports: 445 " 

Summary of Contents for CS-MARS-20-K9 - Security MARS 20













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CS-MARS-20-K9 - Security MARS 20

Valve Concepts 3200 Installation, Operation And Maintenance Manual preview
3200
Brand: Valve Concepts Pages: 15
NEC NEAX 2400 ICS Manual preview
NEAX 2400 ICS
Brand: NEC Pages: 149
NEC LED-E012i User Manual preview
LED-E012i
Brand: NEC Pages: 13
Bang & Olufsen Beolink 1000 Service Manual preview
Beolink 1000
Brand: Bang & Olufsen Pages: 9
Bang & Olufsen Beolink 1000 User Manual preview
Beolink 1000
Brand: Bang & Olufsen Pages: 12
Hach SC1500 User Manual preview
SC1500
Brand: Hach Pages: 86
Lattice Semiconductor HDR-60 User Manual preview
HDR-60
Brand: Lattice Semiconductor Pages: 26
Datavideo RMC-230 Instruction Manual preview
RMC-230
Brand: Datavideo Pages: 17
Datamax I-Class Installation And Operating Instructions Manual preview
I-Class
Brand: Datamax Pages: 22
dbx DriveRack PA User Manual preview
DriveRack PA
Brand: dbx Pages: 52
Hankscraft Runxin HS Series Service Manual preview
HS Series
Brand: Hankscraft Runxin Pages: 58
FATEK FBs-1HLC Operation Manuals preview
FBs-1HLC
Brand: FATEK Pages: 10
Saga SAGA1-L40 User Manual preview
SAGA1-L40
Brand: Saga Pages: 9
Racal Instruments 1260 Manual preview
1260
Brand: Racal Instruments Pages: 94
Racal Instruments 1260 User Manual preview
1260
Brand: Racal Instruments Pages: 97
Hanwell MS1000 Installation Manual preview
MS1000
Brand: Hanwell Pages: 34
HANSONG BM240 User Manual preview
BM240
Brand: HANSONG Pages: 11
Datapath HX4 Quick Start Manual preview
HX4
Brand: Datapath Pages: 12

Brands by name

Popular brands

Load more brands