manualshive.com logo in svg

Cisco CS-MARS-20-K9 - Security MARS 20, User Manual

The Cisco CS-MARS-20-K9 - Security MARS 20 is a highly efficient security management appliance. Unlock the full potential of this product by easily accessing its comprehensive User Manual. Enjoy hassle-free downloading and get your free copy from our website, empowering you to explore the device's features to the fullest.

Share
Download
background image

 

6-28

User Guide for Cisco Security MARS Local Controller

78-17020-01

Chapter 6      Configuring Network-based IDS and IPS Devices

Snort 2.0

Snort 2.0

MARS Expectations of the Snort Syslog Format

The following example Snort syslog messages are used to illustrate the values that are parsed by the 
MARS Appliance:

<161>snort: [1:2050:1] MS-SQL version overflow attempt [Classification: Misc activity] 

[Priority: 3]: {UDP} 69.70.113.64:1449 -> 66.243.153.44:1434

<119>Jul 16 10:54:39 SourceFire SFIMS: [1:469:1] ICMP PING NMAP [Classification: Attempted 

Information Leak] [Priority: 2] {ICMP} 210.22.215.77 -> 67.126.151.137

<161>Mar 12 18:02:22 snort: [ID 702911 local4.alert] [119:2:1] (http_inspect) DOUBLE 

DECODING ATTACK {TCP} 10.1.1.21:60312 -> 10.1.1.69:80

The MARS parser expects the pattern: “[<generator id>:<snort id>:<revision number>]" to identify the 
event as one originating from a Snort device. One that determination is made, MARS looks for either 
"{<protocol_string>} <ip>:<port> -> <ip>:<port>" or "{<protocol_string>} <ip> -> <ip>" to identify 
the five-tuple values.

Configure Snort to Send Syslogs to MARS

For Snort, use the syslog as your output plugin. Configure your syslogd to send copies to another host. 
On most older-style systems (Solaris/Linux), you need to edit 

/etc/syslog.conf

. (Assuming that 

the system is based on syslogd, and not any of the newer system logging facilities. The newer logging 
facilities are not supported by Snort.)

To configure Snort to send syslog messages to the MARS Appliance, follow these steps:

Step 1

Make Snort’s output go to syslog with log facility local4 in 

snort.conf 

(you can pick any local 

facility that's unused.)

  output alert_syslog: LOG_LOCAL4 LOG_ALERT

snort.conf is normally in /etc/snort.

Step 2

Add a redirector in your 

/etc/syslog.conf 

on your Snort box to send syslog to MARS.

 local4.alert @IPAddrOffMarsbox

Step 3

Restart the Snort daemon and the syslogd daemon on your Snort box.

Add the Snort Device to MARS

To add the Snort device to MARS, follow these steps:

Step 1

Click 

Admin > System Setup > Security and Monitor Devices >

 

Add

Step 2

From the 

Device Type 

list, select 

Add SW Security apps on a new host 

or 

Add SW security apps on 

existing host

Summary of Contents for CS-MARS-20-K9 - Security MARS 20













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CS-MARS-20-K9 - Security MARS 20

jbc DI Series Manual preview
DI Series
Brand: jbc Pages: 4
KEENZ Class Instruction Manual preview
Class
Brand: KEENZ Pages: 24
Panasonic KT2 Communication Instruction Manual preview
KT2
Brand: Panasonic Pages: 12
Panasonic CZ-64ESMC1U Operating Instructions Manual preview
CZ-64ESMC1U
Brand: Panasonic Pages: 10
Magnescale MG10-P1 Instruction Manual preview
MG10-P1
Brand: Magnescale Pages: 132
ICP DAS USA I-7188XA User Manual preview
I-7188XA
Brand: ICP DAS USA Pages: 166
ICP DAS USA SMS-531 User Manual preview
SMS-531
Brand: ICP DAS USA Pages: 64
ICS Tunnel Master Jr Manual preview
Tunnel Master Jr
Brand: ICS Pages: 83
ICP DAS USA PROFIBUS PROFI-2510 Quick Start preview
PROFIBUS PROFI-2510
Brand: ICP DAS USA Pages: 4
ICP DAS USA I-8213W-4G User Manual preview
I-8213W-4G
Brand: ICP DAS USA Pages: 40
Parkside PDWE 8 A2 Operation And Safety Notes Translation Of The Original Instructions preview
PDWE 8 A2
Brand: Parkside Pages: 65
Ultratec SureFire Operation Manual preview
SureFire
Brand: Ultratec Pages: 33
Union Instruments CWD2005 SPC Operating Instructions And Safety Notes preview
CWD2005 SPC
Brand: Union Instruments Pages: 63
Haberl Electronic 1E0671-1 MCR2.9 User Manual preview
1E0671-1 MCR2.9
Brand: Haberl Electronic Pages: 9
J+J J4C Series Installation Instructions preview
J4C Series
Brand: J+J Pages: 2
Daruifuno MCC100 User Manual preview
MCC100
Brand: Daruifuno Pages: 24
NEC uPD78F4225Y Manual preview
uPD78F4225Y
Brand: NEC Pages: 30
Kunert Professional LAVADO Operating Manual preview
LAVADO
Brand: Kunert Professional Pages: 29

Brands by name

Popular brands

Load more brands