manualshive.com logo in svg

Cisco CS-MARS-20-K9 - Security MARS 20, User Manual

The Cisco CS-MARS-20-K9 - Security MARS 20 is a highly efficient security management appliance. Unlock the full potential of this product by easily accessing its comprehensive User Manual. Enjoy hassle-free downloading and get your free copy from our website, empowering you to explore the device's features to the fullest.

Share
Download
background image

 

16-2

User Guide for Cisco Security MARS Local Controller

78-17020-01

Chapter 16      Policy Table Lookup on Cisco Security Manager

Overview of Cisco Security Manager Policy Table Lookup

Figure 16-1

Cisco Security MARS Policy Table Query Process

MARS displays all

matching devices. 

Click the

Policy Table

Lookup icon. 

MARS authenticates to Security

Manager with the Security Manager

Username and Password. 

Failed 

Success 

MARS requests the device ID from

Security Manager by providing the

hostname and IP address.

If obtainable, MARS provides the

domain name, and device type.

MARS displays an

error message in a

pop-up window. 

Number

of matching

devices 

Multiple 

None 

One

MARS requests from Security

Manager all access rules that

match the device ID and five tuples.

If available, MARS provides action,

ACL name, interface, and

direction information.  

Error

Success 

MARS displays the Policy Lookup
table for the device and highlights

the matching access rules.  

Select one device. 

End

Error

153840

Summary of Contents for CS-MARS-20-K9 - Security MARS 20













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CS-MARS-20-K9 - Security MARS 20

FAAC E550 Manual preview
E550
Brand: FAAC Pages: 12
Badger Basket 9924 User Manual preview
9924
Brand: Badger Basket Pages: 3
Aalborg DPC Operating Manual preview
DPC
Brand: Aalborg Pages: 128
Yudian AI Series Operation Instruction Manual preview
AI Series
Brand: Yudian Pages: 26
Jäger ADwin-Gold Hardware Manual preview
ADwin-Gold
Brand: Jäger Pages: 50
Lamtec ETAMATIC Manual preview
ETAMATIC
Brand: Lamtec Pages: 136
National Instruments PXIe-8238 Getting Started Manual preview
PXIe-8238
Brand: National Instruments Pages: 6
National Instruments PXI-8231 Installation Manual preview
PXI-8231
Brand: National Instruments Pages: 6
Unitech R16 Installer Manual preview
R16
Brand: Unitech Pages: 55
S&C 6802 Application Manual preview
6802
Brand: S&C Pages: 8
Vaillant sensoCOMFORT VRC 720/3 Operating And Installation Instruction preview
sensoCOMFORT VRC 720/3
Brand: Vaillant Pages: 64
BABYTREND Simply Smart PY75 A Series Instruction Manual preview
Simply Smart PY75 A Series
Brand: BABYTREND Pages: 32
Savant SKL-3040-00 Quick Reference Manual preview
SKL-3040-00
Brand: Savant Pages: 2
I-Tork PDS Series Installation & Operation Manual preview
PDS Series
Brand: I-Tork Pages: 15
MGC RAXN-LCD Installation And Wiring Manual preview
RAXN-LCD
Brand: MGC Pages: 16
Festo CPX-AP-A-16DI-D-M12-5P Operating Instructions Manual preview
CPX-AP-A-16DI-D-M12-5P
Brand: Festo Pages: 16
Haes ELAN HS-5100 User Manual preview
ELAN HS-5100
Brand: Haes Pages: 42
S&C IntelliCap Operation preview
IntelliCap
Brand: S&C Pages: 26

Brands by name

Popular brands

Load more brands