2-55
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Switch Cisco IOS Commands
diagnostic start
diagnostic start
Use the
diagnostic start
privileged EXEC command to run an online diagnostic test.
diagnostic start
test
{
name
|
test-id
|
test-id-range
|
all
|
basic
|
non-disruptive
}
Syntax Description
Defaults
This command has no default setting.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The switch supports these tests:
ID Test Name [On-Demand Test Attributes]
--- -------------------------------------------
1 TestPortAsicStackPortLoopback [B*N****]
2 TestPortAsicLoopback [B*D*R**]
3 TestPortAsicCam [B*D*R**]
4 TestPortAsicRingLoopback [B*D*R**]
5 TestMicRingLoopback [B*D*R**]
6 TestPortAsicMem [B*D*R**]
7 TestInlinePwrCtlr [B*D*R**]
--- -------------------------------------------
When specifying a test name, use the
show diagnostic content
privileged EXEC command to display
the test ID list. To specify test 3 by using the test name, enter the
diagnostic start switch
number
test
TestPortAsicCam
privileged EXEC command.
test
Specify the tests to run.
name
Specify the name of a test. For more information, see the “Usage
Guidelines” section.
test-id
Specify the ID number of a test. The range is from 1 to 7. For more
information, see the “Usage Guidelines” section.
test-id-range
Specify more than one test with the range of test ID numbers. For more
information, see the “Usage Guidelines” section.
all
Specify all the diagnostic tests.
basic
Specify the basic on-demand diagnostic tests.
non-disruptive
Specify the nondisruptive health-monitoring tests.
Release
Modification
12.2(46)EY
This command was introduced.
