2-284
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show interfaces
This is an example of output from the
show interfaces transceiver dom-supported-list
command:
Transceiver Type Cisco p/n min version
supporting DOM
------------------ -------------------------
DWDM GBIC ALL
DWDM SFP ALL
RX only WDM GBIC ALL
DWDM XENPAK ALL
DWDM X2 ALL
DWDM XFP ALL
CWDM GBIC NONE
CWDM X2 ALL
CWDM XFP ALL
XENPAK ZR ALL
X2 ZR ALL
XFP ZR ALL
Rx_only_WDM_XENPAK ALL
XENPAK_ER 10-1888-03
X2_ER ALL
XFP_ER ALL
XENPAK_LR 10-1838-04
X2_LR ALL
XFP_LR ALL
XENPAK_LW ALL
X2_LW ALL
XFP_LW NONE
XENPAK SR NONE
X2 SR ALL
XFP SR ALL
XENPAK LX4 NONE
X2 LX4 NONE
XFP LX4 NONE
XENPAK CX4 NONE
X2 CX4 NONE
SX GBIC NONE
LX GBIC NONE
ZX GBIC NONE
CWDM_SFP ALL
Rx_only_WDM_SFP NONE
SX_SFP ALL
LX_SFP ALL
ZX_SFP ALL
SX SFP NONE
LX SFP NONE
ZX SFP NONE
GIgE BX U SFP NONE
GigE BX D SFP ALL
Related CommandsT
Command
Description
switchport access
Configures a port as a static-access or a dynamic-access port.
switchport mode
Configures the VLAN membership mode of a port.
switchport trunk
pruning
Configures the VLAN pruning-eligible list for ports in trunking mode.