Cisco Catalyst 2350 Command Reference Manual Download Page 32

Page: 32 / 652

2-8

Catalyst 2350 Switch Command Reference

OL-19055-01

Chapter 2 Catalyst 2350 Switch Cisco IOS Commands

archive tar

Command Modes

Privileged EXEC

Command History

Usage Guidelines

Filenames and directory names are case sensitive.

Image names are case sensitive.

Examples

This example shows how to create a tar file. The command writes the contents of the

new-configs

directory on the local flash device to a file named

saved.tar

on the TFTP server at 172.20.10.30:

Switch#

archive tar /create tftp:172.20.10.30/saved.tar flash:/new-configs

This example shows how to display the contents of the

c2350-lanlite-tar.122-46.EY.tar

file that is in

flash memory. The contents of the tar file appear on the screen:

Switch#

archive tar /table flash:c2350-lanlite-tar.122-46.EY.tar

info (219 bytes)

c2350-lanlite-tar.122-46.EY.tar/ (directory)

c2350-lanlite-tar.122-46.EY.tar(610856 bytes)

c2350-lanlite-tar.122-46.EY.tar/info (219 bytes)

info.ver (219 bytes)

This example shows how to display only the

c2350-lanlite-tar.122-46.EY.tar

/html

directory and its

contents:

Switch#

archive tar /table flash:c2350-lanlite-tar.122-46.EY.tar/html

c2350-lanlite-tar.122-46.EY.tar/html/ (directory)

c2350-lanlite-tar.122-46.EY.tar/html/const.htm (556 bytes)

c2350-lanlite-tar.122-46.EY.tar/html/xhome.htm (9373 bytes)

c2350-lanlite-tar.122-46.EY.tar/html/menu.css (1654 bytes)

This example shows how to extract the contents of a tar file on the TFTP server at 172.20.10.30. This
command extracts just the

new-configs

directory into the root directory on the local flash file system.

The remaining files in the

saved.tar

file are ignored.

Switch#

archive tar /xtract tftp://172.20.10.30/saved.tar flash:/ new-configs

Related Commands

Release

Modification

12.2(46)EY

This command was introduced.

Command

Description

archive download-sw

Downloads a new image from a TFTP server to the switch.

archive upload-sw

Uploads an existing image on the switch to a server.

Summary of Contents for Catalyst 2350













































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Catalyst 2350

Reviews:

Brands by name

Popular brands

Cisco Catalyst 2350, Command Reference Manual

Search results

Summary of Contents for Catalyst 2350

Reviews:

Brands by name

Popular brands