2-124
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Switch Cisco IOS Commands
location (global configuration)
location (global configuration)
Use the
location global configuration
command to configure location information for an endpoint. Use
the
no
form of this command to remove the location information.
location
{
admin-tag
string
|
civic-location identifier
id
|
elin-location
string
identifier
id
}
no location
{
admin-tag
string
|
civic-location identifier
id
|
elin-location
string
identifier
id
}
Syntax Description
Defaults
This command has no default setting.
Command Modes
Global configuration
Command History
Usage Guidelines
After entering the
location civic-location
identifier
id
global configuration command, you enter civic
location configuration mode. In this mode, you can enter the civic location and the postal location
information.
Use the
no lldp med-tlv-select location
information interface configuration command to disable the
location TLV. The location TLV is enabled by default. For more information, see the “Configuring LLDP
and LLDP-MED” chapter of the software configuration guide for this release.
Examples
This example shows how to configure civic location information on the switch:
Switch(config)#
location civic-location identifier 1
Switch(config-civic)#
number 3550
Switch(config-civic)#
primary-road-name
"Cisco Way"
Switch(config-civic)#
city
"San Jose"
Switch(config-civic)#
state
CA
Switch(config-civic)#
building 19
Switch(config-civic)#
room C6
Switch(config-civic)#
county "Santa Clara"
Switch(config-civic)#
country US
Switch(config-civic)#
end
You can verify your settings by entering the
show location civic-location
privileged EXEC command.
admin-tag
Configure administrative tag or site information.
civic-location
Configure civic location information.
elin-location
Configure emergency location information (ELIN).
identifier
id
Specify the ID for the civic location or the elin location. The ID range
is 1 to 4095.
string
Specify the site or location information in alphanumeric format.
Release
Modification
12.2(46)EY
This command was introduced.
