2-312
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show lacp
Table 2-19
describes the fields in the display:
Table 2-19
show lacp internal Field Descriptions
Field
Description
State
State of the specific port. These are the allowed values:
•
– —Port is in an unknown state.
•
bndl
—Port is attached to an aggregator and bundled with other
ports.
•
susp
—Port is in a suspended state; it is not attached to any
aggregator.
•
hot-sby
—Port is in a hot-standby state.
•
indiv
—Port is incapable of bundling with any other port.
•
indep
—Port is in an independent state (not bundled but able to
switch data traffic. In this case, LACP is not running on the partner
port).
•
down
—Port is down.
LACP Port Priority
Port priority setting. LACP uses the port priority to put ports s in
standby mode when there is a hardware limitation that prevents all
compatible ports from aggregating.
Admin Key
Administrative key assigned to this port. LACP automatically
generates an administrative key value as a hexadecimal number. The
administrative key defines the ability of a port to aggregate with other
ports. A port’s ability to aggregate with other ports is determined by the
port physical characteristics (for example, data rate and duplex
capability) and configuration restrictions that you establish.
Oper Key
Runtime operational key that is being used by this port. LACP
automatically generates this value as a hexadecimal number.
Port Number
Port number.
Port State
State variables for the port, encoded as individual bits within a single
octet with these meanings:
•
bit0: LACP_Activity
•
bit1: LACP_Timeout
•
bit2: Aggregation
•
bit3: Synchronization
•
bit4: Collecting
•
bit5: Distributing
•
bit6: Defaulted
•
bit7: Expired
Note
In the list above, bit7 is the MSB and bit0 is the LSB.
