manualshive.com logo in svg

Cisco Catalyst 2350, Command Reference Manual

The Cisco Catalyst 2350 is an innovative networking device designed to enhance your network infrastructure. For easy installation and seamless configuration, you can download the free Installation Manual directly from our website, ensuring a smooth setup process. Empower your network with this powerful device, easily accessible through manualshive.com.

Share
Download
background image

 

2-288

Catalyst 2350 Switch Command Reference

OL-19055-01

Chapter 2    Catalyst 2350 Cisco IOS Commands

show interfaces transceivers

This is an example of output from the 

show interfaces 

interface-id

 

transceiver detail

 command:

Switch# 

show interfaces gigabitethernet0/3 transceiver detail

ITU Channel not available (Wavelength not available),

Transceiver is externally calibrated.

mA:milliamperes, dBm:decibels (milliwatts), N/A:not applicable.

++:high alarm, +:high warning, -:low warning, -- :low alarm.

A2D readouts (if they differ), are reported in parentheses.

The threshold values are uncalibrated.

                            High Alarm  High Warn  Low Warn   Low Alarm

        Temperature         Threshold   Threshold  Threshold  Threshold

Port     (Celsius)          (Celsius)   (Celsius)  (Celsius)  (Celsius)

------- ------------------  ----------  ---------  ---------  ---------

Gi0/3 41.5                110.0       103.0      -8.0       -12.0

                            High Alarm  High Warn  Low Warn   Low Alarm

         Voltage            Threshold   Threshold  Threshold  Threshold

Port     (Volts)            (Volts)     (Volts)    (Volts)    (Volts)

-------  ---------------    ----------  ---------  ---------  ---------

Gi0/3  3.20               4.00        3.70       3.00       2.95

                            High Alarm  High Warn  Low Warn   Low Alarm

         Current            Threshold   Threshold  Threshold  Threshold

Port     (milliamperes)     (mA)        (mA)       (mA)       (mA)

-------  -----------------  ----------  ---------  ---------  ---------

Gi0/3  31.0               84.0        70.0       4.0        2.0

         Optical            High Alarm  High Warn  Low Warn   Low Alarm

         Transmit Power     Threshold   Threshold  Threshold  Threshold

Port     (dBm)              (dBm)       (dBm)      (dBm)      (dBm)

-------  -----------------  ----------  ---------  ---------  ---------

Gi0/3  -0.0 ( -0.0)       -0.0        -0.0       -0.0       -0.0

         Optical            High Alarm  High Warn  Low Warn   Low Alarm

         Receive Power      Threshold   Threshold  Threshold  Threshold

Port     (dBm)              (dBm)       (dBm)      (dBm)      (dBm)

-------  -----------------  ----------  ---------  ---------  ---------

Gi0/3  N/A  ( -0.0) --    -0.0        -0.0       -0.0       -0.0

This is an example of output from the 

show interfaces transceiver dom-supported-list 

command:

Switch# 

show interfaces transceiver dom-supported-list

  

Transceiver Type           Cisco p/n min version  

                               supporting DOM     

------------------       -------------------------

   DWDM GBIC                ALL

   DWDM SFP                 ALL

   RX only WDM GBIC         ALL

   DWDM XENPAK              ALL

   DWDM X2                  ALL

   DWDM XFP                 ALL

   CWDM GBIC                NONE

   CWDM X2                  ALL

   CWDM XFP                 ALL

   XENPAK ZR                ALL

   X2 ZR                    ALL

   XFP ZR                   ALL

   Rx_only_WDM_XENPAK       ALL

   XENPAK_ER                10-1888-03

   X2_ER                    ALL

   XFP_ER                   ALL

   XENPAK_LR                10-1838-04

Summary of Contents for Catalyst 2350













































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 2350

Cabletron Systems MMAC-Plus 9H423-26 Supplementary Manual preview
MMAC-Plus 9H423-26
Brand: Cabletron Systems Pages: 14
3Com Gigabit Switch 8 Specifications preview
Gigabit Switch 8
Brand: 3Com Pages: 2
3Com 3C17539 Datasheet preview
3C17539
Brand: 3Com Pages: 12
3Com S7906E - Switch Datasheet preview
S7906E - Switch
Brand: 3Com Pages: 8
Edimax GS-1016 Datasheet preview
GS-1016
Brand: Edimax Pages: 2
ORVIBO ZigBee Mini Hub Faq preview
ZigBee Mini Hub
Brand: ORVIBO Pages: 3
Tripp Lite B310-701-4K Owner'S Manual preview
B310-701-4K
Brand: Tripp Lite Pages: 80
Gefen DVI-841 User Manual preview
DVI-841
Brand: Gefen Pages: 11
PKP PSA10 Instruction Manual preview
PSA10
Brand: PKP Pages: 11
LEGRAND HKRL20 Installation Manual preview
HKRL20
Brand: LEGRAND Pages: 30
IOGear GHDMIMS52 Quick Start Manual preview
GHDMIMS52
Brand: IOGear Pages: 1
Black Box ServSwitch 17S Quick Start Manual preview
ServSwitch 17S
Brand: Black Box Pages: 10
ORiNG TGS-1080-M12 Series Quick Installation Manual preview
TGS-1080-M12 Series
Brand: ORiNG Pages: 2
Pakedge SE-18 Quick Start Manual preview
SE-18
Brand: Pakedge Pages: 12
ADS Technologies USBH-604 Connection Manual preview
USBH-604
Brand: ADS Technologies Pages: 2
G&D DVIMUX8-USB Installation And Operation Manual preview
DVIMUX8-USB
Brand: G&D Pages: 80
HDTV Supply HDTVMT0808140 User Manual preview
HDTVMT0808140
Brand: HDTV Supply Pages: 21
OTS ET2212PpH-S-DR Quick Installation Manual preview
ET2212PpH-S-DR
Brand: OTS Pages: 3

Brands by name

Popular brands

Load more brands