2-287
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show interfaces transceivers
show interfaces transceivers
Use the
show interfaces transceivers
privileged EXEC command to display the physical properties of
a small form-factor pluggable (SFP) module interface.
show interfaces [
interface-id]
transceiver
[
detail
|
dom-supported-list | module
number
|
properties | threshold-table
] [ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
are not displayed, but the lines that contain
Output
are displayed.
Examples
This is an example of output from the
show interfaces
interface-id
transceiver
properties
command:
Switch#
show interfaces gigabitethernet0/1 transceiver properties
Name : Gi0/1
Administrative Speed: auto
Administrative Duplex: auto
Administrative Auto-MDIX: on
Administrative Power Inline: N/A
Operational Speed: auto
Operational Duplex: auto
Operational Auto-MDIX: on
Media Type: 10/100/1000BaseTX
interface-id
(Optional) Display configuration and status for a specified physical
interface.
detail
(Optional) Display calibration properties, including high and low numbers
and any alarm information for any Digital Optical Monitoring
(DoM)-capable transceiver if one is installed in the switch.
dom-supported-list
(Optional) List all supported DoM transceivers.
module
number
(Optional) Limit display to interfaces on module on the switch. The range
is 1 to 9. This option is not available if you entered a specific interface ID.
properties
(Optional) Display speed, and duplex settings on an interface.
threshold-table
(Optional) Display alarm and warning threshold table
| begin
(Optional) Display begins with the line that matches the
expression
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(46)EY
This command was introduced.
