2-314
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show link state group
show link state group
Use the
show
link state group
privileged EXEC command to display the link-state group information.
show link state group
[
number
] [
detail
] [ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Defaults
There is no default.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Use the
show
link state group
command to display the link-state group information. Enter this
command without keywords to display information about all link-state groups. Enter the group number
to display information specific to the group.
Enter the
detail
keyword to display detailed information about the group. The output for the
show link
state group detail
command displays only those link-state groups that have link-state tracking enabled
or that have upstream or downstream interfaces (or both) configured. If there is no link-state
configuration for a group, the group is not shown as enabled or disabled.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
are not displayed, but the lines that contain
Output
are displayed.
Examples
This is an example of output from the
show link state group 1
command:
Switch>
show link state group 1
Link State Group: 1 Status: Enabled, Down
number
(Optional) Number of the link-state group.
detail
(Optional) Specify that detailed information appears.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(46)EY
This command was introduced.
