2-348
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show mls qos vlan
show mls qos vlan
Use the
show mls qos vlan
user EXEC command to display the policy maps attached to a switch virtual
interface (SVI).
show mls qos vlan
vlan-id
[ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
The output from the
show mls qos vlan
command is meaningful only when VLAN-based quality of
service (QoS) is enabled and when hierarchical policy maps are configured.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
Examples
This is an example of output from the
show mls qos vlan
command:
Switch>
show mls qos vlan 10
Vlan10
Attached policy-map for Ingress:pm-test-pm-2
Related Commands
vlan-id
Specify the VLAN ID of the SVI to display the policy maps. The range is 1 to
4094.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(46)EY
This command was introduced.
Command
Description
policy-map
Creates or modifies a policy map that can be attached to
multiple ports and enters policy-map configuration mode.
