2-298
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show ip igmp snooping mrouter
show ip igmp snooping mrouter
Use the
show ip igmp snooping mrouter
privileged EXEC
command to display the Internet Group
Management Protocol (IGMP) snooping dynamically learned and manually configured multicast router
ports for the switch or for the specified multicast VLAN.
show ip igmp snooping mrouter
[
vlan
vlan-id
]
[ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Use this command to display multicast router ports on the switch or for a specific VLAN.
VLAN IDs 1002 to 1005 are reserved for Token Ring and FDDI VLANs and cannot be used in IGMP
snooping.
When multicast VLAN registration (MVR) is enabled, the
show ip igmp snooping mrouter
command
displays MVR multicast router information and IGMP snooping information.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
Examples
This is an example of output from the
show ip igmp snooping mrouter
command. It shows how to
display multicast router ports on the switch.
Switch#
show ip igmp snooping mrouter
Vlan ports
---- -----
1 Gi0/1(dynamic)
vlan
vlan-id
(Optional) Specify a VLAN; the range is 1 to 1001 and 1006 to 4094.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(46)EY
This command was introduced.
