2-349
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show monitor
show monitor
Use the
show monitor
user EXEC
command to display information about all Switched Port Analyzer
(SPAN) and Remote SPAN (RSPAN) sessions on the switch. Use the command with keywords to show
a specific session, all sessions, all local sessions, or all remote sessions.
show monitor
[
session
{
session_number
|
all
|
local
|
range
list
|
remote
} [
detail
]] [
|
{
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
The output is the same for the
show monitor
command and the
show monitor session all
command.
session
(Optional) Display information about specified SPAN sessions.
session_number
Specify the number of the SPAN or RSPAN session. The range is 1 to 66.
all
Display all SPAN sessions.
local
Display only local SPAN sessions.
range
list
Display a range of SPAN sessions, where
list
is the range of valid sessions
,
either a single session or a range of sessions described by two numbers, the
lower one first, separated by a hyphen. Do not enter any spaces between
comma-separated parameters or in hyphen-specified ranges.
Note
This keyword is available only in privileged EXEC mode.
remote
Display only remote SPAN sessions.
detail
(Optional) Display detailed information about the specified sessions.
| begin
Display begins with the line that matches the
expression
.
| exclude
Display excludes lines that match the
expression
.
| include
Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(46)EY
This command was introduced.
