2-43
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Switch Cisco IOS Commands
cluster outside-interface
cluster outside-interface
Use the
cluster outside-interface
global configuration command on the a cluster command switch to
configure the outside interface for cluster Network Address Translation (NAT) so that a member without
an IP address can communicate with devices outside the cluster. Use the
no
form of this command to
return to the default setting.
cluster outside-interface
interface-id
no cluster outside-interface
Syntax Description
Defaults
The default outside interface is automatically selected by the cluster command switch.
Command Modes
Global configuration
Command History
Usage Guidelines
Enter this command only on the cluster command switch. If you enter this command on a cluster member
switch, an error message appears.
Examples
This example shows how to set the outside interface to VLAN 1:
Switch(config)#
cluster outside-interface vlan 1
You can verify your setting by entering the
show running-config
privileged EXEC command.
Related Commands
interface-id
Interface to serve as the outside interface. Valid interfaces include
physical interfaces, port-channels, or VLANs. The port-channel
range is 1 to 48. The VLAN range is 1 to 4094.
Release
Modification
12.2(46)EY
This command was introduced.
Command
Description
show running-config
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_com
mand_reference_list.html
Select the
Cisco IOS Commands Master List, Release 12.2
to
navigate to the command.
