manualshive.com logo in svg

Cisco Catalyst 2350, Command Reference Manual

Share
Download
Cisco Catalyst 2350 Command Reference Manual Download Page 27

 

2-3

Catalyst 2350 Switch Command Reference

OL-19055-01

Chapter 2      Catalyst 2350 Switch Cisco IOS Commands

archive download-sw

archive download-sw

Use the 

archive download-sw

 privileged EXEC command to download a new image from a TFTP server 

to the switch and to overwrite or keep the existing image.

archive download-sw

 [

/allow-feature-upgrade 

| /

directory 

|

 /force-reload 

| 

/imageonly 

| 

/leave-old-sw

 | 

/no-set-boot

 | 

/no-version-check 

|

 /only-system-type 

system-type 

|

 /overwrite 

| 

/reload 

| 

/safe

] 

source-url1 

[

source-url2 source-url3 source-url4

]

archive download-sw

 [

/allow-feature-upgrade 

| /

directory 

|

 /force-reload 

| 

/imageonly 

| 

/leave-old-sw

 | 

/no-set-boot

 | 

/overwrite 

| 

/reload 

| 

/safe

] /

directory

 

source-url1 

[

source-url2 

source-url3 source-url4

]

Syntax Description

/allow-feature-upgrade

Allow installation of software images with different feature sets (for 
example, upgrade from the IP base feature set to the IP services features 
set). 

/directory

Specify a directory for all of the images. 

/force-reload

Unconditionally force a system reload after successfully downloading the 
software image.

/imageonly

Download only the software image but not the HTML files associated with 
the embedded device manager. The HTML files for the existing version are 
deleted only if the existing version is being overwritten or removed.

/leave-old-sw

Keep the old software version after a successful download.

/no-set-boot

Do not alter the setting of the BOOT environment variable to point to the 
new software image after it is successfully downloaded.

/overwrite

Overwrite the software image in flash memory with the downloaded one.

/reload

Reload the system after successfully downloading the image unless the 
configuration has been changed and not been saved.

/safe

Keep the current software image; do not delete it to make room for the new 
software image before the new image is downloaded. The current image is 
deleted after the download.

Summary of Contents for Catalyst 2350













































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands