manualshive.com logo in svg

Cisco Catalyst 2350, Command Reference Manual

The Cisco Catalyst 2350 is an innovative networking device designed to enhance your network infrastructure. For easy installation and seamless configuration, you can download the free Installation Manual directly from our website, ensuring a smooth setup process. Empower your network with this powerful device, easily accessible through manualshive.com.

Share
Download
background image

 

2-258

Catalyst 2350 Switch Command Reference

OL-19055-01

Chapter 2    Catalyst 2350 Cisco IOS Commands

show eap

Expressions are case sensitive. For example, if you enter

 | exclude output

, the lines that contain 

output

 

are not displayed, but the lines that contain 

Output

 appear.

Examples

This is an example of output from the 

show eap registrations 

privileged EXEC command:

Switch> 

show eap registrations

Registered EAP Methods:

  Method  Type            Name

    4     Peer            MD5

Registered EAP Lower Layers:

  Handle  Type            Name

    2     Authenticator   Dot1x-Authenticator

    1     Authenticator   MAB

This is an example of output from the 

show eap registrations transport 

privileged user EXEC 

command:

Switch> 

show eap registrations transport all

Registered EAP Lower Layers:

  Handle  Type            Name

    2     Authenticator   Dot1x-Authenticator

    1     Authenticator   MAB

This is an example of output from the 

show eap sessions 

privileged EXEC command:

Switch> 

show eap sessions 

Role:                    Authenticator   Decision:                Fail

Lower layer:             Dot1x-AuthenticaInterface:               Gi0/1

Current method:          None            Method state:            Uninitialised

Retransmission count:    0  (max: 2)     Timer:                   Authenticator

ReqId Retransmit (timeout: 30s, remaining: 2s)

EAP handle:              0x5200000A      Credentials profile:     None

Lower layer context ID:  0x93000004      Eap profile name:        None

Method context ID:       0x00000000      Peer Identity:           None

Start timeout (s):       1               Retransmit timeout (s):  30 (30)

Current ID:              2               Available local methods: None

Role:                    Authenticator   Decision:                Fail

Lower layer:             Dot1x-AuthenticaInterface:               Gi0/2

Current method:          None            Method state:            Uninitialised

Retransmission count:    0  (max: 2)     Timer:                   Authenticator

ReqId Retransmit (timeout: 30s, remaining: 2s)

EAP handle:              0xA800000B      Credentials profile:     None

Lower layer context ID:  0x0D000005      Eap profile name:        None

Method context ID:       0x00000000      Peer Identity:           None

Start timeout (s):       1               Retransmit timeout (s):  30 (30)

Current ID:              2               Available local methods: None

<Output truncated>

This is an example of output from the 

show eap sessions interface

 

interface-id

 privileged EXEC 

command:

Switch# 

show eap sessions gigabitethernet0/1

Role:                    Authenticator   Decision:                Fail

Lower layer:             Dot1x-AuthenticaInterface:               Gi0/1

Current method:          None            Method state:            Uninitialised

Retransmission count:    1  (max: 2)     Timer:                   Authenticator

ReqId Retransmit (timeout: 30s, remaining: 13s)

EAP handle:              0x5200000A      Credentials profile:     None

Lower layer context ID:  0x93000004      Eap profile name:        None

Summary of Contents for Catalyst 2350













































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 2350

DANLERS WAPIR Installation Notes preview
WAPIR
Brand: DANLERS Pages: 2
National Instruments SCXI-1175 Getting Started Manual preview
SCXI-1175
Brand: National Instruments Pages: 23
Eaton 9476-ET Instruction Manual preview
9476-ET
Brand: Eaton Pages: 43
Xantech 680-10 Installation Instructions preview
680-10
Brand: Xantech Pages: 4
S+S Regeltechnik Premasreg 716 Series Operating Instructions, Mounting & Installation preview
Premasreg 716 Series
Brand: S+S Regeltechnik Pages: 32
steute Ex 355 Mounting And Wiring Instructions preview
Ex 355
Brand: steute Pages: 20
Ametek SIL IntelliPoint RF S*R*L Series Installation And Operating Instructions Manual preview
SIL IntelliPoint RF S*R*L Series
Brand: Ametek Pages: 93
Videplus JAR-SW16-P300 User Manual preview
JAR-SW16-P300
Brand: Videplus Pages: 13
HDTV Supply HDTVCV0702HDS User Manual preview
HDTVCV0702HDS
Brand: HDTV Supply Pages: 15
X-keys XK-60 Product Manual preview
XK-60
Brand: X-keys Pages: 4
senva C-2330 Installation Instructions preview
C-2330
Brand: senva Pages: 2
Black Box Personal MiniHub Manual preview
Personal MiniHub
Brand: Black Box Pages: 22
PIKA mWARP Manual preview
mWARP
Brand: PIKA Pages: 7
Linksys SVIEW02 Specifications preview
SVIEW02
Brand: Linksys Pages: 2
TeleAdapt ConferenceHub TA-6500 User Manual preview
ConferenceHub TA-6500
Brand: TeleAdapt Pages: 16
EtherWAN EX78900X Series Installation Manual preview
EX78900X Series
Brand: EtherWAN Pages: 2
Eaton Cutler-Hammer NTV Series Instruction Bulletin preview
Cutler-Hammer NTV Series
Brand: Eaton Pages: 28
Kramer Sierra Video 3264V5Sxl Specifications preview
Sierra Video 3264V5Sxl
Brand: Kramer Pages: 1

Brands by name

Popular brands

Load more brands