2-181
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Switch Cisco IOS Commands
pagp learn-method
Examples
This example shows how to set the learning method to learn the address on the physical port within the
EtherChannel:
Switch(config-if)#
pagp learn-method physical-port
This example shows how to set the learning method to learn the address on the port-channel within the
EtherChannel:
Switch(config-if)#
pagp learn-method aggregation-port
You can verify your settings by entering the
show running-config
privileged EXEC command or the
show pagp
channel-group-number
internal
privileged EXEC command.
Related Commands
Command
Description
pagp port-priority
Selects a port over which all traffic through the EtherChannel is sent.
show pagp
Displays PAgP channel-group information.
show running-config
Displays the operating configuration. For syntax information, use this link to
the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command_
reference_list.html
Select the
Cisco IOS Commands Master List, Release 12.2
to navigate to
the command.
