2-329
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show mac address-table interface
show mac address-table interface
Use the
show mac address-table interface
user command to display the MAC address table information
for the specified interface in the specified VLAN.
show mac address-table interface
interface-id
[
vlan
vlan-id
] [ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
Examples
This is an example of output from the
show mac address-table interface
command:
Switch>
show mac address-table interface gigabitethernet0/2
Mac Address Table
------------------------------------------
Vlan Mac Address Type Ports
---- ----------- ---- -----
1 0030.b635.7862 DYNAMIC Gi0/2
1 00b0.6496.2741 DYNAMIC Gi0/2
Total Mac Addresses for this criterion: 2
interface-id
Specify an interface type; valid interfaces include physical ports and port
channels.
vlan
vlan-id
(Optional) Display entries for a specific VLAN; the range is 1 to 4094.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(46)EY
This command was introduced.
