2-351
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show pagp
show pagp
Use the
show pagp
user EXEC command to display Port Aggregation Protocol (PAgP) channel-group
information.
show pagp
[
channel-group-number
] {
counters
|
dual-active
|
internal
|
neighbor
} [ | {
begin
|
exclude
|
include
}
expression
]]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
You can enter any
show pagp
command to display the active channel-group information. To display the
nonactive information, enter the
show pagp
command with a channel-group number.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
are appear.
Examples
This is an example of output from the
show pagp 1 counters
command:
Switch>
show pagp 1 counters
Information Flush
Port Sent Recv Sent Recv
--------------------------------------
Channel group: 1
Gi0/1 45 42 0 0
Gi0/2 45 41 0 0
This is an example of output from the
show pagp dual-active
command:
Switch>
show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
channel-group
-number
(Optional) Number of the channel group. The range is 1 to 48.
counters
Display traffic information.
dual-active
Display the dual-active status.
internal
Display internal information.
neighbor
Display neighbor information.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(46)EY
This command was introduced.
