manualshive.com logo in svg

Cisco Catalyst 2350, Command Reference Manual

Share
Download
Cisco Catalyst 2350 Command Reference Manual Download Page 411

 

2-387

Catalyst 2350 Switch Command Reference

OL-19055-01

Chapter 2    Catalyst 2350 Cisco IOS Commands

snmp-server host

Defaults

This command is disabled by default. No notifications are sent.

If you enter this command with no keywords, the default is to send all trap types to the host. No informs 
are sent to this host.

If no 

version

 keyword is present, the default is Version 1.

If Version 3 is selected and no authentication keyword is entered, the default is the 

noauth

 

(noAuthNoPriv) security level.

Command Modes

Global configuration

Command History

notification-type

(Optional) Type of notification to be sent to the host. If no type is specified, 
all notifications are sent. The notification type can be one or more of the 
these keywords:

  •

bridge

—Send SNMP Spanning Tree Protocol (STP) bridge MIB traps.

  •

cluster

—Send cluster member status traps.

  •

config

—Send SNMP configuration traps.

  •

copy-config

—Send SNMP copy configuration traps.

  •

entity

— Send SNMP entity traps.

  •

envmon

—Send environmental monitor traps.

  •

flash

—Send SNMP FLASH notifications.

  •

fru-ctrl

—Send entity FRU control traps. 

  •

snmp—

Send SNMP-type traps.

  •

storm-control—

Send SNMP storm-control traps.

  •

stpx—

Send SNMP STP extended MIB traps.

  •

syslog—

Send SNMP syslog traps.

  •

tty—

Send TCP connection traps.

  •

udp-port 

port

—

Configure the User Datagram Protocol (UDP) port 

number of the host to receive the traps. The range is from 0 to 65535.

  •

vlan-membership—

 Send SNMP VLAN membership traps.

  •

vlancreate—

Send SNMP VLAN-created traps.

  •

vlandelete—

Send SNMP VLAN-deleted traps.

  •

vtp—

Send SNMP VLAN Trunking Protocol (VTP) traps.

Release

Modification

12.2(46)EY

This command was introduced.

Summary of Contents for Catalyst 2350













































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands