Cisco Catalyst 2350 Command Reference Manual Download Page 578

Page: 578 / 652

B-38

Catalyst 2350 Switch Command Reference

OL-19055-01

Appendix B Catalyst 2350 Debug Commands

debug platform supervisor-asic

Use the

debug platform supervisor-asic

privileged EXEC command to enable debugging of the

supervisor application-specific integrated circuit (ASIC). Use the

form of this command to disable

debugging.

debug platform supervisor-asic

{

all

errors

receive

send

}

no debug platform supervisor-asic

{

all

errors

receive

send

}

Syntax Description

Defaults

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The

undebug platform supervisor-asic

command is the same as the

no debug platform

supervisor-asic

command.

Related Commands

all

Display all supervisor-ASIC event debug messages.

errors

Display the supervisor-ASIC error debug messages.

receive

Display the supervisor-ASIC receive debug messages.

send

Display the supervisor-ASIC send debug messages.

Release

Modification

12.2(46)EY

This command was introduced.

Command

Description

show debugging

Displays information about the types of debugging that are enabled.

Summary of Contents for Catalyst 2350













































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Catalyst 2350

Reviews:

Brands by name

Popular brands

Cisco Catalyst 2350, Command Reference Manual

Search results

Summary of Contents for Catalyst 2350

Reviews:

Brands by name

Popular brands