4-77
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 4 Commands for the Cisco uBR10012 Router
show pxf cpu
Related Commands
VCCI map
Displays the memory address for the Virtually Cool Common Index (VCCI)
map table for this particular VCCI. The VCCI is an index that uniquely
identifies every interface or subinterface on the PXF processor and that
quickly maps that interface to the appropriate set of services and features.
VCCI
Identifies the VCCI (in hexadecimal) that is assigned to the interface or
subinterface.
Table 4-11
show pxf cpu subblocks Field Descriptions
Field
Description
Command
Description
clear pxf
Clears the direct memory access (DMA) and error checking and correcting
(ECC) error counters on the PXF processor.
debug pxf
Enables debugging of the PXF subsystems on the active PRE1 module on
the Cisco uBR10012 router.
show pxf cable
Displays information about the multicast echo and packet intercept features
for one or all cable interfaces.
show pxf cable
interface
Displays information about a particular service ID (SID) on a particular
cable interface.
show pxf dma
Displays information for the current state of the PXF DMA buffers, error
counters, and registers.
show pxf microcode
Displays identifying information for the microcode being used on the
processor.
show pxf xcm
Displays the current state of ECC for the External Column Memory (XCM)
on the PXF processor.
show ip mroute
Displays the contents of the IP multicast routing table.
