4-62
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 4 Commands for the Cisco uBR10012 Router
show pxf cpu
Defaults
No default behavior or values
Command Modes
User EXEC, Privileged EXEC
Command History
Examples
See the following sections for typical displays for the different forms of the
show pxf cpu
command.
Access-Lists
The following example shows a typical display for the
access-list qos
option, which displays
information about the processing of quality-of-service (QoS) access-lists:
Router#
show pxf cpu access qos
PXF QoS ACL statistics:
ACL State Tables Entries Config Fragment Redundant Memory
101 Operational 1 9 1 0 0 1Kb
First level lookup tables:
Block Use Rows Columns Memory used
0 TOS/Protocol 1/128 0/32 16384
1 IP Source (MS) 1/128 0/32 16384
2 IP Source (LS) 1/128 0/32 16384
statistics
[
diversion
|
drop
[
interface
] |
ip
|
mlp
]
Displays statistics for the packets that the PXF has processed. The default
is to display all packet statistics, or you can optionally specify one of the
following keywords to display a particular type of statistics:
•
diversion
—(Optional) Displays packets that the PXF diverted to the
main route processor for special handling.
•
drop
[
interface
]—(Optional) Displays dropped packets and bytes. You
can also optionally display the dropped packets for a particular
interface.
•
ip
—(Optional) Displays statistics for the processing of IP and ICMP
packets.
•
mlp
—(Optional) Displays statistics for multilink point-to-point
protocol (MLPPP) packets.
subblocks
[
interface
]
Displays subblocks information for all interfaces, or optionally for one
interface.
Release
Modification
12.2(1)XF1
This command was introduced as
show hardware pxf cpu
for the
Cisco uBR10012 router.
12.2(11)BC2
The MAC domain was added to the display of the
show pxf cpu subblocks
command for a particular cable interface.
12.2(15)BC2
This command was renamed from
show hardware pxf cpu
to
show pxf
cpu
. In addition, the
cef
option was enhanced to display CEF tag adjacency
information. The
verbose
option was also added to the
cef
option to display
more detailed information about the Forwarding Information Base (FIB)
tables being maintained by the CEF subsystem.