3-222
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show interface cable monitor
show interface cable monitor
To display cable monitor information, use the
show interface cable monitor
command in privileged
EXEC mode.
show interface cable
{
slot/port
|
slot
/
subslot
/
port
}
monitor
Syntax Description
Command Modes
Privileged EXEC
Command History
Examples
The following is sample output from the
show interface cable monitor
command:
CMTS01#
show interface cable 5/0 monitor
US/ Time Outbound Flow Flow Type Flow Packet MAC MAC Encap
DS Stmp Interface Type Identifier Extn. Type Extn. Type Type
us no Et1/2 us-port 0 yes data no - docsis
all no Et1/2 acc-list 103 yes data no - docsis
all yes Et1/2 mac-addr 0050.0000.0000 yes mac no - -
slot/port
Identifies the cable interface and downstream port on the Cisco uBR7100 series
and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is
1/0
. On the
Cisco uBR7200 series router,
slot
can range from 3 to 6, and
port
can be 0 or 1,
depending on the cable interface.
slot/subslot/port
Identifies the cable interface on the Cisco uBR10012 router. The following are
the valid values:
•
slot
= 5 to 8
•
subslot
= 0 or 1
•
port
= 0 to 4 (depending on the cable interface)
Release
Modification
12.1(3a)EC
This command was introduced.
12.2(4)XF
Support was added for the Cisco uBR10012 universal broadband router.
12.2(4)BC1
Support was added to the Release 12.2 BC train.
Table 3-55 show interface cable monitor Field Descriptions
Field
Description
DS
Downstream. Indicates that only downstream flows are monitored.
UP
Upstream. Indicates that only upstream flows are monitored.
ALL
Indicates that all flows are monitored.
