3-159
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show cable subscriber-usage
5 0007.0e03.2c25 test1 0 Jan1 00:00:00 Jan1 00:00:00 -
Router#
The following example shows typical output for the
sort-byte-count
option for the
show cable
subscriber-usage
command:
Router#
show cable subscriber-usage
sort-byte-count
Sfid Mac Address Enforce-rule Total-Kbyte Last-detect Last-penalty Pen
Name Count time time Flag
7 0007.0e03.2cad test1 65157114 Feb24 11:36:34 Mar3 11:36:34 Act
9 0007.0e03.2c45 test1 16381014 -
5 0007.0e03.2c25 test1 13440960 -
Router#
Table 3-42
describes the fields shown by the
show cable subscriber-usage
command.
Related Commands
Table 3-42 show cable subscriber-usage Field Descriptions
Field
Description
SFID
Number of the Service Flow ID.
Mac Address
Hardware address (MAC address) of the subscriber’s cable modem.
Enforce-rule Name
Name of the enforce-rule being applied to this subscriber.
Total Kbyte count
Total number of kilobytes consumed by the subscriber’s cable
modem during the last monitoring-duration window.
Note
The total byte count is reset to 0 whenever an enforce-rule’s
configuration is changed.
Last-detect Time
Last time period, if any, at which it was determined that the cable
modem was using more bandwidth than allowed by their QoS
profile. This value also shows the time at which the enforced QoS
profile was automatically applied, if this option has been enabled.
Last-penalty Time
If an enforced QoS profile is currently in effect, this field shows the
time period at which the subscriber’s current penalty time expires,
at which point their original registered QoS profile is restored.
Penalty Flag
Identifies whether a penalty enforce-rule has been applied to this
cable modem.
Command
Description
activate-rule at-byte-
count
Specifies the number of bytes that a subscriber can transmit during the
monitoring period.
cable qos enforce-rule
Creates an enforce-rule to be used to enforce a particular quality of service
(QoS) profile and enters enforce-rule configuration mode.
enabled
Activates an enforce-rule and begins subscriber traffic management.
enforced qos-profile
Specifies the quality of service (QoS) profile that should be enforced when
users violate their assigned QoS profiles.
monitoring-duration
Specifies the time period and sample rate to be used for monitoring
subscribers.
penalty-period
Specifies the time period that an enforced quality of service (QoS) profile
should be used for subscribers that violate their registered QoS profile.
