3-26
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show cable flap-list
show cable flap-list
To display the cable flap-list on a Cisco CMTS, use the
show cable flap-list
command in user EXEC or
privileged EXEC mode.
show cable flap-list
show cable flap-list cable
{
slot/port
|
slot
/
subslot
/
port
} [
upstream
port
]
[
sort-flap
|
sort-int
|
sort-
mac
|
sort-time
]
show cable flap-list sort-interface
[
sort-flap
|
sort-int
|
sort-mac
|
sort-time
]
Syntax Description
Command Modes
User EXEC, Privileged EXEC
Command History
cable
slot/port
(Optional) Displays the flap list for a particular cable interface on the
Cisco uBR7100 series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router,
slot
can range from 3 to 6, and
port
can
be 0 or 1, depending on the cable interface.
cable
slot/subslot/port
(Optional) Displays the flap list for a particular cable interface on the
Cisco uBR10012 router. The following are the valid values:
•
slot
= 5 to 8
•
subslot
= 0 or 1
•
port
= 0 to 4 (depending on the cable interface)
upstream
port
(Optional) Displays the flap list for a particular upstream on the
selected cable interface.
sort-interface
(Optional) Displays the flap list for all cable interfaces, sorted by
interface.
sort-flap
(Optional) Sorts the list by the number of times the CM has flapped.
sort-int
(Optional) Sorts the list first by the Cisco CMTS cable interface.
sort-mac
(Optional) Sorts the list first by the Cisco CMTS cable interface and
then by the CM MAC (hardware) address.
sort-time
(Optional) Sorts the list by the most recent time the CM is detected to
have flapped.
Release
Modification
11.3 NA
This command was introduced.
12.0(3)T
This command was supported on the Cisco mainline release.
