4-58
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 4 Commands for the Cisco uBR10012 Router
show pxf cable interface
show pxf cable interface
To display information about a particular service ID (SID) on a particular cable interface, use the
show
pxf cable
command in user EXEC or privileged EXEC mode.
show pxf cable interface
cable
x/y/z
sid
{
classifiers
|
mac-rewrite
|
queue
|
service-flow ds
|
service-flow us
}
Syntax Description
Defaults
No default behavior or values.
Command Modes
User EXEC, Privileged EXEC
Command History
Usage Guidelines
The
show pxf cable interface
command displays the DOCSIS-related information for a particular
service ID (SID) on a particular cable interface.
Examples
The following example shows a typical display for SID 1 on cable interface c8/0/0 for the
show pxf cable
interface classifiers
command:
Router#
show pxf cable interface c8/0/0 1 classifiers
CM Classifiers:
Mac Rw Index: 18 CCB Index: 47
id=1, sfid=91 CFR Index 16461 RP sfindex 16461,
prio=7, sip=0.0.0.0, sip mask=0.0.0.0
dip=0.0.0.0, dip mask=0.0.0.0, prot=17, tos=0,FF
sport = 0,65535, dport = 0,65535 matches = 0
cable
x/y/z
Identifies the cable interface for which information should be displayed.
sid
Identifies the service ID (SID) for which information should be displayed.
The valid range is 1 to 8191.
classifiers
Displays the packet classifiers used for this SID.
mac-rewrite
Displays the CPE MAC information for this SID.
queue
Displays the status of the queues being used by this SID.
service-flow ds
Displays the service flow IDs (SFID) associated with the given SID on the
downstream for the given cable interface.
service-flow us
Displays the SFIDs associated with the given SID on the upstream for the
given cable interface.
Release
Modification
12.2(11)BC2
This command was introduced as
show hardware pxf cable
for the
Cisco uBR10012 router.
12.2(15)BC2
This command was renamed from
show hardware pxf cable interface
to
show pxf cable interface
.