manualshive.com logo in svg

Cisco Aironet 350 Series, Administration Manual

The Cisco Aironet 350 Series is a cutting-edge wireless access point that offers seamless connectivity. To swiftly set it up, you can easily access the free Quick Start Manual available for download at our website. This comprehensive manual provides step-by-step instructions and guidelines to optimize your experience with the Cisco Aironet 350 Series.

Share
Download
background image

Smart Network Application (SNA)

Services

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

533

25

 

The selection of VLANs is from a list where all present VLANs on the network can be 
selected. If the VLAN does not exist on a device to which a selected interface belongs, this 
VLAN will be created as part of the service operation.

The user can also select an option to add a VLAN (1-4094). This VLAN will be added to all 
switches that have interfaces that were selected for the service.

Interface Settings

This service configures basic interface settings for ports or LAGs.

Display Parameters

•

Administrative Status—Up/Down.

•

Current Status—Up/Down/Suspended. If the port is suspended, the suspension reason 
is shown in parenthesis. For example: "Suspended (ACL)".

•

Auto Negotiation—Enabled/Disabled

•

Administrative Speed—This parameter is only displayed if Auto Negotiation is 
disabled.

The values can be 10M, 100M, 1000M, 2500M, 5G, or 10G.

•

Current Speed—10M, 100M, 1000M, 2500M, 5G, or 10G.

•

Administrative Duplex Mode—This parameter is only displayed if Auto Negotiation is 
disabled.

The values can be Half or Full.

•

Current Duplex Mode—Half or Full.

Editable Parameters

•

Administrative Status—Up/Down.

•

Auto Negotiation—Enabled/Disabled.

•

Speed—This parameter is only available for editing if Auto Negotiation is disabled. 
The possible values for speed are: 10M, 100M, 1000M, 2500M, 5G, or 10G. Different 
types of ports are capable of different subsets of these values, and the options displayed 
in the service depend on the types of ports currently selected.

•

Duplex Mode—This parameter is only available if Auto Negotiation is disabled and if 
the selected speed is 10M or 100M. 

Summary of Contents for Aironet 350 Series



























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Aironet 350 Series

3Com OfficeConnect 3CRWE254G72 Installation Steps preview
OfficeConnect 3CRWE254G72
Brand: 3Com Pages: 1
Sena FreeWire SP29 User Manual preview
FreeWire SP29
Brand: Sena Pages: 25
HQ EL-ES04HQ Manual preview
EL-ES04HQ
Brand: HQ Pages: 37
Skross Classic USB Manual preview
Classic USB
Brand: Skross Pages: 2
National Instruments NI 5762 User Manual And Specifications preview
NI 5762
Brand: National Instruments Pages: 27
Exsys EX-6605E Manual preview
EX-6605E
Brand: Exsys Pages: 2
VOLTCRAFT 51 42 02 Operating Instructions Manual preview
51 42 02
Brand: VOLTCRAFT Pages: 8
Emos QUICK V0113 Instruction Manual preview
QUICK V0113
Brand: Emos Pages: 24
Leader LC 2130 Instruction Manual preview
LC 2130
Brand: Leader Pages: 12
TP-Link TL-WN310G User Manual preview
TL-WN310G
Brand: TP-Link Pages: 37
MITSUBISHI ELECTRIC ENGINEERING ERNT-AQB35N User Manual preview
ERNT-AQB35N
Brand: MITSUBISHI ELECTRIC ENGINEERING Pages: 2
TYPHOON 20001 Instruction Manual preview
20001
Brand: TYPHOON Pages: 75
PointMobi in charge User Manual preview
in charge
Brand: PointMobi Pages: 9
Danfoss VLT Midi Drive FC 280 Operating Manual preview
VLT Midi Drive FC 280
Brand: Danfoss Pages: 82
Schwaiger PowerLine PLC502M User Manual preview
PowerLine PLC502M
Brand: Schwaiger Pages: 52
Gigafast WF747-Ul User Manual preview
WF747-Ul
Brand: Gigafast Pages: 46
Extron electronics Captive Screw Plug to 3.5 mm Mini Jack Adapter CSM 6 Specification Sheet preview
Captive Screw Plug to 3.5 mm Mini Jack Adapter CSM 6
Brand: Extron electronics Pages: 1
Extron electronics BNCF-BNCF/10 Specification Sheet preview
BNCF-BNCF/10
Brand: Extron electronics Pages: 1

Brands by name

Popular brands

Load more brands