manualshive.com logo in svg

Cisco Aironet 350 Series, Administration Manual

The Cisco Aironet 350 Series is a cutting-edge wireless access point that offers seamless connectivity. To swiftly set it up, you can easily access the free Quick Start Manual available for download at our website. This comprehensive manual provides step-by-step instructions and guidelines to optimize your experience with the Cisco Aironet 350 Series.

Share
Download
background image

Security: 802.1X Authentication

Overview

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

363

18

 

STEP  4

Click 

Apply

, and the Running Configuration file is updated.

Use the 

Copy Settings

 button to copy settings from one port to another.

Workflow 4: To configure the quiet period

STEP 1

Click 

Security > 802.1X Authentication > Port Authentication.

STEP  2

Select a port, and click 

Edit

.

STEP  3

Enter the quiet period in the Quiet Period field.

STEP  4

Click 

Apply

, and the Running Configuration file is updated.

Workflow 5: To configure the guest VLAN:

STEP 1

Click 

Security > 802.1X Authentication >

 

Properties

.

STEP  2

Select 

Enable

 in the Guest VLAN field.

STEP  3

Select the guest VLAN in the Guest VLAN ID field.

STEP  4

Configure the Guest VLAN Timeout to be either Immediate or enter a value in the User 
defined field.

STEP  5

Click 

Apply

, and the Running Configuration file is updated.

Workflow 6: To configure unauthenticated VLANs

STEP 1

Click 

Security > 802.1X Authentication 

> 

Properties

.

STEP  2

Select a VLAN, and click 

Edit

.

STEP  3

Select a VLAN.

STEP  4

Optionally, uncheck 

Authentication

 to make the VLAN an unauthenticated VLAN.

STEP  5

Click 

Apply

, and the Running Configuration file is updated.

Workflow 7: To configure supplicant 802.1x on an interface

STEP 1

Click 

Security > 802.1X > Supplicant Credentials

 to configure supplicant credentials.

STEP  2

Click 

Security > 802.1X > Port Authentication

.

STEP  3

Select the required port and click 

Edit

.

STEP  4

Enable supplicant support and specify the credentials to use.

Summary of Contents for Aironet 350 Series



























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Aironet 350 Series

D-Link DGE-530T Quick Install Manual preview
DGE-530T
Brand: D-Link Pages: 15
3idee ass-mxaq Assembly Instructions Manual preview
ass-mxaq
Brand: 3idee Pages: 7
Magnadyne Linear Series Installation Manual preview
Linear Series
Brand: Magnadyne Pages: 2
Diamond Multimedia Diamond BVU160 Specification Sheet preview
Diamond BVU160
Brand: Diamond Multimedia Pages: 1
Transcend JetFlash 220 User Manual preview
JetFlash 220
Brand: Transcend Pages: 23
Renkforce 1346300 Operating Instructions Manual preview
1346300
Brand: Renkforce Pages: 8
Everex Magic I/O EV-170 Owner'S Manual And Reference Manual preview
Magic I/O EV-170
Brand: Everex Pages: 40
Acard AEC-7730A Quick Manual preview
AEC-7730A
Brand: Acard Pages: 2
TP-Link TL-WN822N User Manual preview
TL-WN822N
Brand: TP-Link Pages: 49
Gossen MetraWatt Z250I Operating Instructions preview
Z250I
Brand: Gossen MetraWatt Pages: 2
Dantel 46033 Installation & Operation Manual preview
46033
Brand: Dantel Pages: 48
Lindy 43188 User Manual preview
43188
Brand: Lindy Pages: 12
GeoVision GV-PA191 Installation Manual preview
GV-PA191
Brand: GeoVision Pages: 2
Targus ACB10US1 Quick Start preview
ACB10US1
Brand: Targus Pages: 2
Gigaset HomePlug AV 200 User Manual preview
HomePlug AV 200
Brand: Gigaset Pages: 18
Elnec DIL32/PLCC32 ZIF-CS Manual preview
DIL32/PLCC32 ZIF-CS
Brand: Elnec Pages: 2
Adaptec AHA-2940UW/OF User Manual preview
AHA-2940UW/OF
Brand: Adaptec Pages: 50
InnoMedia MTA6328 Quick Configuration Manual preview
MTA6328
Brand: InnoMedia Pages: 14

Brands by name

Popular brands

Load more brands