manualshive.com logo in svg

Cisco Aironet 350 Series, Administration Manual

The Cisco Aironet 350 Series is a cutting-edge wireless access point that offers seamless connectivity. To swiftly set it up, you can easily access the free Quick Start Manual available for download at our website. This comprehensive manual provides step-by-step instructions and guidelines to optimize your experience with the Cisco Aironet 350 Series.

Share
Download
background image

Multicast

IPv4 Multicast Configuration

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

273

15

 

•

Query Robustness

—Enter the number of expected packet losses on a link 

•

Query Interval (sec)

—Interval between the General Queries to be used if this device 

is the elected querier. 

•

Query Max Response Interval (sec)

—Delay used to calculate the Maximum 

Response Code inserted into the periodic General Queries.

•

Last Member Query Interval (msec)

—Maximum Response Delay to be used if the 

device cannot read Max Response Time value from group-specific queries sent by the 
elected querier.

•

Multicast TTL Threshold

—Enter the Time-to-Live (TTL) threshold of packets being 

forwarded on an interface.

Multicast packets with a TTL value less than the threshold are not forwarded on the 
interface.

The default value of 0 means all Multicast packets are forwarded on the interface.

A value of 256 means that no Multicast packets are forwarded on the interface.

Configure the TTL threshold only on border routers. Conversely, routers on which you 
configure a TTL threshold value automatically become border routers.

STEP  2

Select an interface, and click 

Edit

. Enter the values of the fields described above.

STEP  3

Click 

Apply

. The Running Configuration file is updated.

IGMP VLAN Settings

To configure IGMP on a specific VLAN: 

STEP 1

Click 

Multicast

 > 

IPv4 Multicast Configuration > IGMP VLAN Settings

.

The following fields are displayed for each VLAN on which IGMP is enabled:

•

Interface Name

—VLAN on which IGMP snooping is defined.

•

Router IGMP Version

—Version of IGMP Snooping.

•

Query Robustness

—Enter the number of expected packet losses on a link. 

•

Query Interval (sec)

—Interval between the General Queries to be used if this device 

is the elected querier. 

•

Query Max Response Interval (sec)

—Delay used to calculate the Maximum 

Response Code inserted into the periodic General Queries.

Summary of Contents for Aironet 350 Series



























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Aironet 350 Series

Keysight Technologies N5192A Getting Started Manual preview
N5192A
Brand: Keysight Technologies Pages: 31
Movincool Office Pro 24 Installation Manual preview
Office Pro 24
Brand: Movincool Pages: 2
C. Crane Versa WiFi USB Adapter 3 Quick Start Manual preview
Versa WiFi USB Adapter 3
Brand: C. Crane Pages: 30
Pace DC50Xu Quick Start Manual preview
DC50Xu
Brand: Pace Pages: 15
VSmart V5IIA Product Description preview
V5IIA
Brand: VSmart Pages: 9
Proyecson PAA20+ Installation Manual preview
PAA20+
Brand: Proyecson Pages: 148
Davis Instruments Coupler Kit Install Manual preview
Coupler Kit
Brand: Davis Instruments Pages: 4
Atheros ARS42-SB Manual preview
ARS42-SB
Brand: Atheros Pages: 48
VENOM PRO ALL-IN-ONE Instruction Manual preview
PRO ALL-IN-ONE
Brand: VENOM Pages: 2
Black Box IC138A-R2 Manual preview
IC138A-R2
Brand: Black Box Pages: 20
ZyXEL Communications AG-225H Quick Start Manual preview
AG-225H
Brand: ZyXEL Communications Pages: 28
Aaronn 100014153 Quick Start Manual preview
100014153
Brand: Aaronn Pages: 2
Keyspan USA-19H Manual preview
USA-19H
Brand: Keyspan Pages: 40
insys icom ISDN TA 4.0 Manual preview
ISDN TA 4.0
Brand: insys icom Pages: 100
Snom 320 Quick User Manual preview
320
Brand: Snom Pages: 2
SWEEX BT214 Installation preview
BT214
Brand: SWEEX Pages: 4
Crown IQ-PIP-USP2 Reference Manual preview
IQ-PIP-USP2
Brand: Crown Pages: 65
videogeniX uSwitch Installation And Operating Manual preview
uSwitch
Brand: videogeniX Pages: 43

Brands by name

Popular brands

Load more brands