Cisco Aironet 350 Series Administration Manual Download Page 46

Page: 46 / 762

Dashboard

Identification

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

The following configuration options (right-hand corner) are available:

•

Refresh Time

—Select one of the options displayed.

•

Multicast Groups

—Click to open

MAC Group Address

•

MAC Address Table

—Click to open

Dynamic Addresses

•

TCAM Utilization Information

—Click to open

Hardware Resource Utilization

•

CPU Utilization Information

—Click to open

CPU Utilization

Identification

This module displays basic information regarding the device and stack, as shown below:

It displays the following fields:

•

System Description

—Displays description of the device.

•

Host Name

—Entered in the

System Settings

page or default is used. Also can be

added in the

Getting Started Wizard

•

Firmware Version

—Current firmware version running on device.

•

MAC Address (master unit)

—MAC address of the unit.

•

Serial Number (master unit)

—Serial number of the unit.

•

System Location

—Enter the physical location of the device.

•

System Contact

—Enter the name of a contact person.

•

Total Available Power

—Amount of power available to the device.

Summary of Contents for Aironet 350 Series



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aironet 350 Series

Reviews:

Related manuals for Aironet 350 Series

Brands by name

Popular brands

Cisco Aironet 350 Series, Administration Manual

Search results

Summary of Contents for Aironet 350 Series

Reviews:

Related manuals for Aironet 350 Series

Brands by name

Popular brands