Administration: File Management
Firmware Operations
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
95
7
•
File Name
—Enter the name of the file to be updated (not relevant for Backup by HTTP/
HTTPS).
STEP 3
Click
Apply
.
STEP 4
Click
Reboot
.
To update or backup firmware using TFTP:
STEP 1
Click
Administration
>
File Management
>
Firmware Operations
.
The following fields are displayed:
•
Active Firmware File
—Displays the current, active firmware file.
•
Active Firmware Version
—Displays the version of the current, active firmware file.
STEP 2
Enter the following fields:
•
Operation Type
—Select
Update Firmware
or
Backup Firmware
.
•
Copy Method
—Select
TFTP
.
•
Server Definition
—Select whether to specify the TFTP server
By IP address
or
By
name
.
If Server Definition is By Address:
•
IP Version
—(If Server Definition is By Address) Select whether an IPv4 or an IPv6
address for the server is used.
•
IPv6 Address Type
—Select the IPv6 address type (if IPv6 is used). The options are:
-
Link Local
—The IPv6 address uniquely identifies hosts on a single network link. A
link local address has a prefix of FE80, is not routable, and can be used for
communication only on the local network. Only one link local address is supported.
If a link local address exists on the interface, this entry replaces the address in the
configuration.
-
Global
—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
•
Link Local Interface
—Select the link local interface (if IPv6 is used) from the list.
•
Server IP Address/Name
—Enter the IP address or the name of the TFTP server,
whichever is relevant.
•
(Update) Source
—Enter the name of the source file.
